8" x 20" OKAMOTO UNIVERSAL CYLINDRICAL GRINDER |
|
Stock Code: |
17030 |
Price: | $67,500 |
Subcategory: | Cylindrical Universal Grinders |
Manufacturer: |
Okamoto |
Model: |
OGM-8.20UDX |
Condition: | Used |
8" X 20" OKAMOTO UNIVERSAL PRECISION CYLINDRICAL GRINDER
PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $67,500.00
HMC Stock No. 17030 Price new today with included optional
Machine Serial No. 13249 accessories is over $89,000.
Machine Model No. OGM-8.20UDX
New Date: September 2014
CAPACITY:
Swing Over Table: 8.66"
Distance Between Centers: 19.68"
Maximum Diameter to be Ground: 7.87"
Maximum Weight Between Centers: 132 Lbs.
GRINDING WHEELHEAD:
Grinding Wheel: 12" OD x 1" Wide x 5" Bore
X Axis Head Infeed Travel: 8"
Swivel Angle: ± 30°
Least Travel Increment: 0.0001"
Automatic Rough Feed: 0 to 0.0015" (11 Stages)
Automatic Fine Feed: 0 to 0.0001" (7 Stages)
Manual Pulse Feed (x.1, x1): 0.0001, 0.001 Inch/Div.
Number of Spark Outs: 0 to 5
(2) Speeds Via V Belt Change Common Pulley: 2087 & 2357 RPM
Wheel Peripheral Speed Maximum: 6585 FPM
TABLE:
Z Axis Table Travel: 25.2"
Swivel Angle: +4° to -9°
Handle Feed Rate: 0.30" Per Revolution
Automatic Feed Rate: 2 to 157 IPM
Table Traverse Via Ball Screw Drive
Double V Way Table Design
WORKHEAD:
Spindle for Dead or Live Combined Use
Center Taper: #3 Morse
Through-Hole Diameter: 0.69" Dia.
Swivel Angle: 30° to 90°
Spindle Speeds Variable : 10 to 500 RPM
Workhead Jog Button
TAILSTOCK:
Quill Taper: #3 Morse
Quick Acting Lever Type Quill Stroke: 0.8"
MOTORS:
Grinding Wheel Spindle: 2 (3.5)HP
Workhead Spindle: 0.53 HP
Table Feed: 0.53 HP
Lubrication Pump: 0.013 HP
Coolant Pump: 0.08 HP
POWER SUPPLY:
Consumption: 10 KVA
8 KVA Isolation Transformer - Supplied
Required Input: 3 Phase 60 Hz, 230 or 460 Volts, 20 Amps
Output: 200 or 220 Volts, 50 Hz
TANK CAPACITY:
Coolant Tank: Approx. 21 Gallons Each
Lubrication Tank: 0.79 Gallon
EQUIPPED WITH:
Fully Automatic Cycle with Rough/Fine Grinding and Spark-Out in 1 Set-Up
Okamoto MDI Controller with Manual Pulse Generator
This machine is designed for English (inch) only operation.
(3) Leveling Bolts with Plates
Acu-Rite Digital Readout for Z Axis Table Travel Only, Model DRO200S-2XG
Standard Coolant System- No Magnetic Separator
Additional Coolant System with Paper Filter, Type A601PC3, Capacity 40 L/min. with Paper Catch Pan
(4) Grinding Wheel Hubs with Adjustable Balance Weights
Okamoto Wheel Balancing Stand with (3) Arbors
Hand Wheel Type 5C Collet Chuck with Adapter Plate
(57) Assorted 5C Collets
(1) Octagon Shaped 5 C Collet Holder
(1) 3-1/8" Diameter x 3-1/2" Long 5 C Collet Holder
Wheelhead Rapid Advance/Retract
Wheelhead Incremental Head Feed and Plunge Grinding
Infeed Can occur at One End or at Both Ends of Table Reverse Travel
Swing Down Internal Grinding Attachment with Swing Away Wheel Guard
(2) Cartridge Type Internal Grinding Spindles
(1) Internal Attachment Motor Mounted Speed Pulley and Belt Speed Unknown (Either 18K or 25K)
Automatic Central Lubrication System
Sliding Splash Guard Doors
Assorted Space Control Cables
Assorted Factory Manuals
Halogen Work Light
Table and Tailstock Mounted Wheel Dressers with Diamonds
Morse Taper Reducer Sleeve #3 OD to #2 ID
(1) Solid Type Work Center #2 Morse Taper
Adjustable Part Stop Rod for Workhead
Table Swivel Angle Measuring Unit with Dial Indicator
Lista 7 Drawer Tool Cabinet with Hardwood Top
Factory Shipping Brackets
Grinding Wheel Lug Wrench and Fastening Nut
(5) Carbide Tipped Dead Centers #3 Morse Taper
(1) Steel Dead Center #3 Morse Taper
(2) Steel Dead Centers #2 Morse Taper
(1) Morse New Taper Reducer Sleeve #3 Morse OD to #2 Morse ID
(3) Assorted Size Tapered Steel Mandrels with Bushings
(2) ID Spindle Stone Holders, Screw in Type
(1) Model 80S Work Piece Driver, 60 to 80 mm Diameter Capacity
(1) Model 22 Work Piece Driver, 13 to 24 mm Diameter Capacity
(1) Model 60S Work Piece Driver, 47 to 62 mm Diameter Capacity
(1) Model 30 Work Piece Driver, 20 to 33 mm Diameter Capacity
(1) Model 40 Work Piece Driver, 31 to 42 mm Diameter Capacity
(1) Model 13 Work Piece Driver, 6 to 14 mm Diameter Capacity
(2) New 3/4" Dia. x 6" Long Vermont Precision HSS Drill Blanks
(1) Unused Radiac Grinding Wheel, 12" x 0.5" x 5" Bore, #5707895-MD400-N100-B-BQ
(19) Unused Norton Crystolon Grinding Wheels, Size 3" x 1" x 1/2" Bore
#66243529172, Grain – Grade 37C100-HVK, 10825 Max., RPM
OVERALL SIZE OF COMPONENTS:
Machine: 89" L-R x 63" F-B x 67" High (DRO & Light Removed) x 4,180 Lbs.
Transformer: 17" x 26" x 28" High x ? Lbs.
Coolant Tank: 28" x 47" x 31" High (On Wheels) x ? Lbs.
Other Coolant Tank: 32" x 39" x 24" High (On Wheels) x ? Lbs.
Lista Cabinet: 47" L-R x 29" F-B x 43-1/2" High x ? Lbs.
See more pictures at http://www.hildebrandmachinery.com/17030-morepics.html
See OEM documentation at http://www.hildebrandmachinery.com/17030-manuals.pdf
OR
click on VIEW MORE INFORMATION link bleow
This machine is listed for sale by Hildebrand Machinery Co Inc
located in York, Pennsylvania