ORII 06HR3 COIL LINE |
|
Stock Code: |
36639 |
Price: | $RFQ |
Subcategory: | Coil Feeders |
Year of Manufacture: |
2016 |
Manufacturer: |
Oriimec-Corp-Of-Ame |
Model: |
LCC 06HR3 |
Condition: | Used |
**Stock Specification**
Material: SPC, SPH, SAPH
Surface Treatment: None
Thickness: .0236" - .236"
Width: 2.75" - 23.62"
Coil I.D. 20"
Coil O.D. 59"
Coil Mass: 11023.11 lbs
<br>
**Line Specification**
Line Speed: 65.6 FPM
Acc. + Dec. Time .4 sec
Max. Feed Length: 19.69"
Feed Direction: Right to Left
Pass Line Height (F.L. to P.L.) 37.4"
Control Voltage: 24 VDC
Power Supply: 480V (+/-) 10% x 60 Hz
Step Down Transformer: ORII&MEC
Power Consumption: 27.2 kVa
Min. Air Supply: 0.49 MPa (5kgf/cm^2)
Air Consumption: 1300NL/min (at 100 spm Release)
Repeatability (Except for hard Chrome Feed Roll): (+/-)0.012"
Finish Color:
- Main Body: ORII No. 15
- Cover: ORII No. 5
- Moving Parts ORII No. 5
- Panel: ORII No. 15
- Operation Panel: ORII No. 15
- Control Panel 25-70B
Max. Releasing Speed: 100 SPM
Operation and Name Plate: English
Warning Plate: English
<br>
**Coil Car Specfication**
Coil O.D. 59"
Coil O.D. Spacer: None
Lifting Mechanism: Hydraulic Cylinder
Lifting Stroke: 17.72"
Coil Table: Steel Rolls
Roll Drive: None
Electric Supply: Cable Track
Coil Positioning System (Coil Side Guide Double Use): Positioning Plate
Positioning Plate Drive: None
Coil Slide Guide: Slide Type
Travel Mechanism: Electric
Travel Motor: 0.4kw
Travel Distance: 65"
Travel Speed 3.7" / second
Tilt Mechanism: None
<br>
**Uncoiler Specification**
Pay Off Direction: Down
Uncoiler Rotation: None
Mandrel Drive Motor: Provided, 2.2 kW
Mandrel Expansion: Pneumatic
Expansion Range: 17.64" to 20.16"
Brake: Magnetic Brake
Spacer: None
Coil Hold Down: Swing Arm Type
- Mechanism: Pneumatic
- Roll Drive: Provided, 0.4kW
- Roll Brake: Provided
- Roll Specification: Urethan Coating
- Band Slit: None
- Hold Down Force: 4900 N (1100 lb)
- Coil Holding End Detector: Provided (20")
Coil Keeper: Roller
- Adjustment: Manual
Thread Guide: Fixed Type
- Drive System: None
Max. Line Speed: 72.2 FPM
<br>
**Straightener / Feeder Specification**
Main Motor: AC Servo Motor
No. of Work Rolls: Upper 4 / Lower 3
Backup Roll: Provided
Measure Roll: None
Straightening Adjustment: Manual
Straightening Indicator: Dial Indicator
Roll Lift Mechanism: Pneumatic
Threading Roll Pressurize: Pneumatic
Feed Roll Pressurize: Pneumatic
Catenary Roll: Steel Roller
Entry Stock Slide Guide: Handle (2-Layer)
Remote Operation Switch: Pendant Type, 16' wire
Passline Adjustment: Push Button
EQUIPPED WITH:
Allen-Bradley Controls
Model RH Lube System
31.5" Steel Exit Guide
Contact Input Press Interface
POD Cover
Analog Loop
This machine is listed for sale by
located in Elk Grove Village, Illinois