Wanderer Model 31M Horizontal Spline Hobber & Thread Miller |
|
Stock Code: |
ghwax |
Price: | $RFQ |
Subcategory: | Gear Spline Hobbers |
Manufacturer: |
Wanderer |
Model: |
31M |
Condition: | Used |
S/N: 13017
EQUIPPED WITH:
Heavy Duty Head. Universal Head For Thread Milling. (2) Steady Rests. (1) Follow Rest. Full Set Of Change Gears. 12" 3-Jaw Chuck With 4" Hole.
SPECIFICATIONS:
Work Capacity:
Long Thread Milling, Single & Multi Start Thread, low/high pitch 1-48mm / 1/16" - 1-3/4"
Hobbing (spline shafts, polygonal shapes, spur gears etc).
No of teeth hobbed with heavy duty head 4 to 60
Spiral Hobbing (Single Thread)
No. of teeth hobbed with universal head 4 to 90
No. of teeth hobbed with heavy duty head 4 to 60
Circular Milling (grooves, slots, etc)
with change gears out of mesh
Side Milling
Height of Centers 220mm / 8.66"
Max. Work Diameter above Saddle 200mm / 7.87"
Max. Work Diameter above Bed 440mm / 17.32"
Length of Cutter Travel between Centers 3000mm / 118.11
Reduction of Length of Cutter Travel by Large Size Work Head 100mm / 3.93"
Reduction of Length of Cutter Travel by Large Size Work Head and
3-Jaw Chuck 250mm / 9.84"
Max. and Min. Cutter Diameter 120/65mm / 4.72/2.55"
Pitch of Leadscrew 2 TPI
No. of Feeds at each Cutter Speed, Thread Milling 24
Hobbing Feed per Work Resolution 0.32-5.0mm / 0.012"-.196"
No. & Range Cutter Speeds with Universal Head (9) 40 to 240
No. & Range Cutter Speeds with Heavy Duty Head (9) 27 to 160
Max. Cutter Diameter Heavy Duty Head 120 x 130mm / 4.72 x 5.11"
This machine is listed for sale by Adams Machinery Company
located in Lake Bluff, Illinois