KENT USA MODEL JHG-1510 CENTER HOLE GRINDER - NEW
Outstanding Features:
The machine is suitable for cuting tool, spindle, tool holder, gear shafts and tempered transmission shafts and the workpiece requests high accuracy from cylindrical grinding. The quality of cylindrical grinding will depend on the center holes circular geometrical accuracy.
PRICE INCLUDES:
Supporter, Ø30mm tungsten long center, Ø30mm tungsten short center, concentric adjusting rod, tool box, tools, work lamp, grinding wheel (Ø27mm, Ø27x10mm, Ø48x10mm)
GENERAL SPECIFICATIONS
Range of Diameter | 0.197" - 4.92" |
Range of Length | 1.97-39.37" |
Max. Weight of Workpiece | 220 Lbs |
Center Hole Angle | 60º |
Center Hole Max Diameter | 2.36" |
Center Guide Hole Min Diameter | 0.0787" |
Capacity Planetary Reciprocation | 0.059" |
Spindle Motor | 1/2 HP AC |
Motor Planetary Reciprocation | 1/5 HP AC |
For Workpiece Drive | 1/2 HP AC |
Travel of Spindle | 5.91" |
Max. Travel Per Wheel Revolution | 0.0394" |
Travel Per Wheel Graduation | 0.000394" |
Spindle Speed | 2000 RPM |
Travel of Dressing Diamond | 1.57" |
Vertical Travel Per Wheel Revolution | 0.059" |
Horizontal Travel Per Wheel Revolution | 0.059" |
Voltage | 3 Phase, 60 Cycle, 220 Volts |
Electric Capacity | 1.9 KVA |
Weight | 1389 Lbs |