buy & sell, new & used
machinery, machine tools
not a member?
Brakes & Folding Machines
165 Ton x 13' BAILEIGH® 5-Axis CNC Hydraulic Press Brake - $RFQ
Item Number: #
165 Ton x 13' BAILEIGH® 5-Axis CNC Hydraulic Press Brake
CALL FOR AVAILABILITY AND BEST PRICING!
NEW 5-Axis CNC Press Brake from BAILEIGH!
CALL 386-304-3720 FOR YOUR CUSTOM QUOTE
FREE Training at Factory
If you are looking to improve the efficiency and accuracy of your bending processes while on a budget, the BP-16513CNC 5 axis hydraulic brake press might just be what you are looking for. This 220 volt three phase machine has 165 tons of bending pressure over its entire length of 157”. That is long enough to bend a 13 foot piece of mild steel. The fully welded all steel construction of the BP-16513CNC-5, is designed for maximum rigidly and minimum deformation during the bending process. Baileigh Industrial press brakes utilize electric-hydraulic servo system, with fully closed loop control for synchronization movement of the ram to stay parallel to the bending table at all times. To ensure that the BP-16513CNC-5 continues to operate at peak capacity, Baileigh Industrial has included an industrial grade hydraulic system for years of worry free production made by Rexroth, Nachi, & Merkel.
SYNCHRONISM SYSTEM: The synchronism on this machine is measured via linear encoder and will automatically correct parallel through the servo valves and encoder system to ensure maximum accuracy. All this is controlled by the touch screen control module.
Top punch clamping: European style with quick change
Top punch: European style sectional goose neck top punch
Multi V Die M70 with Max. Opening is 35mm.
All Baileigh tooling is full ground and hardened.
Tooling material 42CrMo
FEATURES - CNC CONTROLLER:
The new generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of today's press brakes. Ease of use combined with state-of-the-art technology go hand in hand, improving productivity.
The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Functions are directly located where you need them, offering optimized ergonomics throughout the application.
The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling.
Highly effective control algorithms optimize the machine cycle and minimize set-up time. This makes using press brakes easier, more efficient and more versatile than ever.
CALL FOR MORE INFORMATION 386-304-3720
DA66T CNC Controller from DELEM, made in Holland to control 5 axis: Y1-Y2-X-R-V.
Y1-Y2 axis: Linear encoder for electronic ram depth—setting, equilibration, calibration
X axis: front/backward movement of the back gauge driven by ball screw
and AC servomotor.
R axis: up/downward movement of the back gauge fingers with AC servomotor.
V: adjustable crowning on working table by CNC Control.
Z1-Z2: Lateral displacement of the back gauge fingers, movable on linear
guide rail by hand.
Front support arms, two pieces with guide rail.
Safety guarding: fence guard on throat and rear side of the machine
SS Brand Light Curtain on both side of machine
Foot pedal with emergency stop.
Cooling fans for electrical cabinet.
Foot operation station with emergency stop.
Operation and maintenance instructions
Floor type frames, no special foundation required.
Power supply: 220V/ 60Hz /3 phases (optional voltages available)
Display safety voltage: 24V, DC
Bending Width: 157” (4000mm)
Back Gauge Length: 23.5" (600mm)
Return Speed: 4.3" / sec. (110mm/sec)
Maximum Pressure: 165 tons
Throat Depth: 15.7" (400mm)
Stroke of Ram: 7.8” (200mm)
Approach Speed: 5" / sec. (130mm/sec)
Back Gauge Motor: 1/2 HP
Bending Speed: .393" / sec.(10mm/sec)
Main Motor: 24 hp (18.5Kw)
Distance Between Housings: 124"(3150mm)
Distance From Table To Ram: 15.7"(400mm)
CNC Axis: 5-Axis (Y-1, Y-2, X, R, V)
Volume of Oil Tank: 93 gal.
Power: 220V / 3-phase (optional voltages available)
Machine size: 170” x 69” x 98.5” (4320 x 1750 x 2500mm)
Shipping Weight: 28,700 lbs.(13,000 Kgs)
Repetition accuracy: +/- 0.01 mm
Accuracy of positioning: +/- 0.02 mm
Programming accuracy: 0.01 mm
Positioning accuracy: 0.1 mm
Repetition accuracy: 0.02 mm
Speed: 130 mm/s
Programming accuracy: 0.1 mm
Repetition accuracy: ±0.1 mm
Positioning accuracy: ±0.25 mm
V-Axis: CNC Control the crowning working table
Programming accuracy: ±0.02 mm
Adjustment range: 0.00—1.50 mm
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by
Sierra Victor Industries
located in Port Orange, Florida
Find more listings for
Baileigh Press Brakes,
New Press Brakes
Press Brakes in Florida
Contact the Seller
Sierra Victor Industries
610-B Oak Place
Type the code shown*:
* Mandatory field
Note: For security all enquiries may be monitored
* Report advert as sold or incorrect details
All fields are required
Your Phone Number
Help / FAQ
Terms & Conditions
Copyright © MachineSales Inc. All Rights Reserved.
All transactions on MachineSales are charged in USD$ from a US-based merchant account