1 1/2" (38mm), HETRAN, MODEL WS-15, BAR PEELER, 4000# COILS (11585) |
|
Stock Code: |
11585 |
Price: | $RFQ |
Subcategory: | Bar Turners / Peelers |
Year of Manufacture: |
1993 |
Manufacturer: |
Hetran |
Model: |
1 1/2" (38MM) |
Condition: | New |
MACHINE 11585
We are pleased to offer the following for your consideration, subject to
attached terms and conditions:
(1) Used HETRAN Coil-to-Coil Rod and Wire Peeling/Shaving Line,
Model WS-15, New 1993
Specifications:
Working Range Finish Dia.: 0.5" - 1.5"
Wire Throughfeed Speed: Up To 150' / Min.
Diameter Tolerance: -0" / +0.003"
Removal in Diameter: 0.012" - 0.080"
Motor: 100 HP DC 440V 3/60
Line Consists of the Following Components:
1. 5000 Lb. Horizontal Pay-Off Reel w/ (1) Set of Infeed Rolls
2. (3) 7-Roll Straightening Sections (2) Horizontal and (1) Vertical)
All Rolls Driver
3. (1) 4-Roll Infeed Unit, Hydraulically Driven
4. Shaving Head Mounted on Rod Shaver Spindle Driven Through Infinitely-
Variable SCR-Controlled 100 HP Motor, Spindle Runs on Super-Precision Angular
Contact Bearings and Carries the Shaving Head Self-Centering Material Entry
and Exit Guide Assemblies in Front and Back
(1) 4-Toolholder Shaving Head
Precision Set-Up Fixture to Pre-Set Toolholders
Tool Wear Compensation Device
5. (2) 4-Roll Pinch Roll Units, Air-Actuated
6. Items #2 - #5 are Mounted on a Common Steel-Frame Base. Steel Chips Drop
Directly onto Chip Conveyor. The Machine Base is Also Used for Recirculating
Coolant Reservoir.
7. (1) Chip Conveyor w/ (1) High-Pressure Coolant Pump
8. (3) Belt Polishers, Model BP-2
Working Diameter Range:0.5" - 1.5"
Wire Throughfeed Speed:Up To 150' / Min.
Abrasive Belt Size:8" Wide x 60" Length
Motors: 15 HP AC 460V
Each Belt Polisher Consists of (1) Polishing Head
Assembly w/ (3) Rollers ((1) Idle,
(1) Tracking and (1) Drive Roll).
A Horizontal Pinch Roll Unit is Mounted on
Exit End of Each Polisher Housing.
9. (1) Filtering System
10. (1) Horizontal Straightener Section
11. (1) Tension-Free Recoiler Unit
4-Aluminum Roll Feed-Out Unit and 3-Roll Recoiler,
Hydraulically Driven Double Carrousel Stand
12. (1) Hydraulic Power Unit
13. All Input Electrics are 460V. All Operating Electrics are 110V.
14. (1) Pendulum-Mounted Operator's Control Panel
Floor Space Required (Approx.):55' x 23'
**PLEASE NOTE PRELIMINARY SPECIFICATIONS**
**PRICE QUOTED IS AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATIONS BY PURCHASER**
This machine is listed for sale by Machinery International Corp
located in Woodbridge, Connecticut