3" X 6" X 6.5" FENN 4HI METALLIC LITHIUM ROLLING MILL W/ HYDRAULIC SCREWDOWN |
|
Stock Code: |
112622 |
Price: | $RFQ |
Subcategory: | 4 - Hi Rolling Mills |
Manufacturer: |
Fenn |
Condition: | Used |
MANUFACTURER - FENN
YEAR - 2014
CONFIGURATION - 4HI
SCREWS - HYRDAULIC
DESIGNED USE - METALLIC LITHIUM EXTRUDED SHEET
INLET THICKNESS RANGE - 150-300 microns (in pancake coil)
FINISH THICKNESS RANGE - 15-100 microns (interleaved 12 microns in pancake
coils)
COIL WEIGHT - 10 Kgs
WIDTH RANGE - 2"-6.5" (50mm-150mm)
WORK ROLL- 3" x 14" (76.2mm x 355.6mm)
BACK-UP ROLL - 6" x 14" (152.4mm x 362mm)
MILL SPEED - 70 Meters/Min (Adjustable)
MOTORS - 1.5 Kw Main Mill Motor, 0.5 Kw on Both Reels
MILL COMPONENTS:
DRIVEN UNCOILER FOR PANCAKE WOND COILS OF LITHIUM
3" Diameter mandrel
0.5 Kw motor
10 Kgs coil weight capacity
Traversing assembly to adjust material to mill
Speed and tension control dancer
NINE ROLL LEVELER (4/5 CONFIGURATION)
.94" (23.7mm) diameter rolls
Pneumatic cylinder adjustment
4HI ROLLING MILL
Hydraulic screwdowns
Hydraulic roll bending
Work Rolls have predrilled holes for cooling (if needed for future
application)
Back-up rolls are supported on double row taper roller bearings
Mill lubrication system
Exit air wipers
Exit support roll
Speed and tension control system to control applicator rolls
Entry/Exit thickness measuring system
Entry/Exit camera vision system
w/ Manual roll removal cart
Spare set of work rolls
APPLICATOR ROLLS
Applicator/pinch roll assembly to apply cross-strip pressure to ensure
adhesion of Lithium to PP strips.
One roll is driven - 0.5 Kw motor
Load/Unload and pressure are all operated from operators controls
SPEED & TENSION CONTROL DANCER
This unit is used to control the speed of the wind up system.
RECOILER
3" Diameter Mandrel
0.5 Kw motor
Lithium & PP coil is collected on an aluminum core 3" inside diameter
17 Kgs Max weight (10 Kgs Lithium + 7 Kg PP)
PP UNWINDER
The unwinder is for Pancake Would Coils of PP
Pneumatic expansion on the mandrel
1.0 Kw motor
PP Coil is supplied mounted on an aluminum core 3" inside diameter
PP weight is 60 Kgs and the weight of the core is 16 Kgs
Maximum width of the PP is 6.5" (165mm)
HYDRAULIC POWER SYSTEM
ELECTRICAL DRIVE & CONTROL SYSTEM
ELECTRICAL CABINET
OPERATOR CONSOLE
This machine is listed for sale by National Machinery Exchange Inc
located in Newark, New Jersey