50" x 40" SHARP® High Precision CNC Flat Bed Lathe |
|
Stock Code: |
STF-50 |
Price: | $RFQ |
Subcategory: | CNC Flatbed Lathes |
Manufacturer: |
Sharp |
Model: |
STF-50 |
Condition: | New |
CALL FOR AVAILABILITY AND BEST PRICING!
FEATURES:
This is a high precision CNC flat bed lathe with FANUC Oi-TD control. The STF series is available with option of 9", 12" or 15" spindle bore, 37.38"- 59.84" swing over bed, bed width of 32" and the spindle motor is available up to 30 HP.
The hardened and ground bedways are made from high quality Meehanite castings. The spindle drive has 4 steps to deliver full power at all speeds. Bedways and ballscrews are centrally lubricated with low level alarm. Headstock is equipped with heat exchanger to disperse heat and maintain spindle accuracy. Full length chip conveyor and enclosed splash guard are all standard accessories.
This is a heavy duty precision CNC lathe that can function at full horsepower during low and high speeds.
The large spindle bore and wide bedways are ideal for big parts and large mold work pieces.
This machine is available with option 9", 12" or 15" spindle bore, 37.38"- 59.84" swing over bed and bed width of 32".
The hardened and ground bedways are made from high quality Meehanite castings.
The spindle drive has 4 steps to deliver full power at all speeds.
The bedways and ballscrews are centrally lubricated with low level alarm.
The headstock is equipped with a heat exchanger to disperse heat and maintain spindle accuracy.
A full length chip conveyor and enclosed splash guard are all standard accessories.
STANDARD EQUIPMENT:
Spindle 4-steps speed auto change
XZ-axes auto lubrication system
XZ-axes with Turcite-B
XZ-axes C3 ball screw
Hydraulic 4-way tool turret H4
Rear Chain type Chip conveyor
Coolant system
Fully enclosed splash guard
Heat exchanger
Electron hand wheel
Alarm lamp for working and cutting finish
Work lamp
Dead center
Level pads
Tools and tool box
Operation manual
RS-232 interface
Standard packing pallet
SPECIFICATIONS:
CAPACITY
Max Swing Over Bed: 50.4" (1280)
Swing Over Cross Slide: 35.43" (900)
Distance Between Centers: 40" (1016)
BED
Width of Bed: 31.88" (810)
Length of Bed: 135.83" (3450)
Bed Way: 2 V, 2 Flat Ways
HEADSTOCK
Spindle Bore: 5.98" (152mm) (Opt: 9", 12", 15")
Spindle Taper: MT #6
Spindle Nose: A2-11 (Opt. A2-15, A2-20)
Range of speeds (44.1"): 4-420 rpm (may vary by chuck size or motor HP)
Range of speeds (>44.1"): 4-350 rpm (may vary by chuck size or motor HP)
No. of Spindle Speeds: 4 steps of gear, command by M code, hydraulic driven
TRAVEL
X-Axis Travel: 19.7" (based on 4 way hyd turret installed on carriage)
Z-Axis Travel: 39.37"
Diameter of X-Axis Ball Screw: 40 mm
Diameter of Z-Axis Ball Screw: 63 mm
FEED
X, Z-axis rapid feed rate: 196.85"/min (5000 mm/min)
X,Z-axis cutting feed rate: 118.11"/min (3000 mm/min)
OP-TURRET
Turret Type: 4 tools (H4) 8 tools (V8), 12 tools (V12), VDI (coolant access)
Tool Shank/Numbers: 1.23" x 1.23", 1.57" x 1.57" (40mm x 40mm)
Tool Holder Bore Diameter: 1.97"
MOTOR
Spindle Motor: 30 HP
X-axis Servo Motor: 4 HP (Fanuc AC servo)
Y-axis Servo Motor: 5.5 HP (Fanuc AC servo)
Hydraulic Pump: 2 HP (1.5 kw)
Coolant Pump: 1.7 HP (1.275 kw)
CONTROL
Control: Fanuc Oi Control
OPTIONAL ITEMS:
Transformer 55KVA
Transformer 60KVA
3-jaw scroll strong chuck (direct mounted) A2-11-20" (500mm)
3-jaw scroll strong chuck (direct mounted) A2-11/15-25" (630mm)
Hydraulic 3-jaw wedge type through-hole power chuck 18"
Hydraulic 3-jaw wedge non through-hole power chuck 18"
4-jaw independent chuck 32" (810mm, A2-11)
4-jaw independent chuck 40" (1000mm, A2-11)
4-jaw independent chuck 50" (1250mm, A2-11)
Face plate with 4-jaw, A2-11-32"
Face plate with 4-jaw, A2-11-40" (grip range 150-900mm)
Face plate with 4-jaw A2-11-50" (grip range 150-1150mm)
Steady rest 16" (bearing type, grip range 60mm-400mm)
Steady rest 24" (bearing type, grip range 380mm-600mm)
Follow rest (grip range 30-150mm)
Boring attachment for bar diagram 120mm
Spindle oil chiller 12000BTU
Hydraulic turret V-8 tools - boring toolholder 50mm-3 pcs, facing toolholder 32x32-1 pcs, 40, 32, 20, 16, 12, 10mm to fit boring toolholder
Hydraulic turret V-12 tools - boring toolholder 50mm-3 pcs, facing toolholder 32x32-1 pcs, 40, 32, 20, 16, 12, 10mm to fit boring toolholder
Air conditioner
Extra charge for spindle bore changed to 9" (230mm) fit to spindle nose A2-15
Extra charge for spindle motor α30 (30KW/40HP) instead of α22
Extra charge for spindle bore changed to 15" (380mm) fit to spindle nose A2-15
Extra charge for spindle motor α40 (37KW) instead of α22 (22KW/30HP)
CALL FOR COMPLETE LIST
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida