Category Lathes - Shaft Type, Manual
Manufacturer Cincinnati
Model 18” Tray Top with Gap
Serial Number 2W4U5E-13
Year 1960s
Swing Over Bed 20.00 in 508.00 mm
Swing In Gap 28.00 in 711.20 mm
Swing Over Cross Slide 12.50 in 317.50 mm
Distance Between Centers 108.00 / 120.00 in 2743.00 / 3045.00 mm
X – Cross Slide Travel 12.00 in 304.80 mm
Z – Carriage Travel 108.00 in 2743.20 mm
Turret Four station manual
Chuck Diameter 10.00 and 12.00 inch
Chuck Type Three jaw and four jaw independent
Spindle Bore 1.75 in 44.45 mm
Spindle Power 5.00 HP kW
Spindle Speed 25 – 980 RPM
Spindle Nose L-1
Tailstock Quill Diameter 2.25 in 57.15 mm
Tailstock Quill Travel 5.00 in 127.00 mm
Thread Range 1-1/2 - 92 TPI (48 Selections)
Feed rate 0.321” to 0.0019”
Ways Flame Hardened and Ground
Way Covers None
Chip Conveyor None
Coolant Yes
Power 3 ph / 50 – 60 Hz / 200 – 500 V Existing
Additional Steady rest, full length hydraulic, Scanamatic tracer
Machine Length 170.00 in 4318.00 mm
Machine Width 36.00 in 914.40 mm
Machine Height 60.00 in 1524.00 mm
Weight 8000.00 lbs 17600.00 kg
Condition Excellent, Tool room use only

This machine is listed for sale by Hadanich Machine located in Washington, Pennsylvania