BAILEIGH Jointer/Planer JP-1898-NC |
|
Stock Code: |
JP-1898-NC |
Price: | $RFQ |
Subcategory: | Planer & Jointer Combo |
Manufacturer: |
Baileigh |
Model: |
JP-1898-NC |
Condition: | New |
CALL FOR AVAILABILITY AND BEST PRICING!
FEATURES:
Built from steel and cast iron, this numerically controlled 18” jointer/planer saves space and does the work of 2 machines without compromising on quality.
7.5 hp motor has enough strength to cut and smooth 18” boards.
4.75” helical cutter head (included) spins at 5,700 rpm.
6 rows of rotatable carbide blades on the spiral cutter head will remain sharp for much longer than a straight-knife cutter could.
Runs on 220-volt 3-phase power.
98” table supports your boards, ensures true, straight cuts.
Digital controller lets you adjust the height of the 63” x 18” jointer table.
Programmable system for the planer lets you enter your desired spacing, and machine takes care of the rest.
Control panels with big stop and start buttons are simple to use.
Parallelogram-style jointer bed helps prevent accidents by maintaining a tight, uniform gap between the table and the cutter—regardless of the table height.
5/16” maximum cutting depth at the jointer station.
Fence can tilt up to 45° for edge joining.
71” x 18” planer table (with a large resting area on both sides) makes it easier for you to maneuver the material.
Variable infeed speed from 16 to 50 feet per minute lets you finetune to fit the wood you’re working with and get a better finish.
Rubber infeed and outfeed rollers reduce friction and keep boards moving smoothly.
2 large 6” dust ports, one for each function, can connect to your dust collector so your shop stays pristine with safe, breathable air.
Covered by a 1-year parts warranty.
Replacement parts are in stock at our Wisconsin warehouse. We can get them to you without delay.
You can count on lifetime technical support by phone from a team of experience woodworkers, all of whom know our machines inside and out.
SPECIFICATIONS:
Table Size (Length):98"
Table Size (Width): 18"
RPM: 5700
Fence Tilt: 45°
Maximum Depth of Cut (Resaw): 1/4"
Cutter Head Diameter: 4.75"
Max Stock Width: 18"
Number of Knives: Helical Cutter Head
Maximum Stock Height: 9.8"
Minimum Stock Thickness: 3/16"
Feed Speed: 16 to 50 FPM Variable
Table Elevation: Digital Control
Jointer Maximum Cutting Depth: 1/4"
Power: 220V, Three Phase
Horse Power: 7.5
Weight: 3,036 lbs.
Shipping Weight: 3,100 lbs.
Shipping Dimensions: 106" x 48" x 59"
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida