CALL FOR BEST PRICING!

FEATURES:
MADE IN USA
TENNSMITH'S LM Series Mechanical Shears utilize a low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid performance. The LM410 incorporates the unique 2x-F back gauge system. This allows the operator to move the backstop from 0 - 24 inches in approximately 2 seconds with only two rotations of the handle. The LM610 and LM810 incorporate the same 2x-F system, but with the added capacity of 30-inch travel. An optional digital readout is available for this system.
The LM Series shears are standard with four-edge, high carbon, high chrome top and bottom blades, independent, self-leveling hold down feet with neoprene inserts, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table with hand well, dual inch/metric inlaid bed scales and non-metallic gibs.
LM410 capacities are 10-gauge mild steel, 16-gauge stainless up to 52-1/2" in cutting length.
LM610 capacities are 10-gauge mild steel, 14-gauge stainless up to 73" in cutting length.
LM810 capacities are 10-gauge mild steel, 14-gauge stainless up to 98" in cutting length.
To enhance productivity, optional equipment available for the machines.
The LM Series also has available an air operated sheet support system. This system is available in two styles for the LM412:
System-R drops the supported material to the rear of the machine
System-F returns the supported material to the front of the machine via a front return chute
The Models LM610 and LM810 are available only with System-R
Please call 386-304-3720 for details

SPECIFICATIONS:
Maximum shearing capacity, Mild Steel*: 10 gauge / 3.5mm
Maximum shearing capacity, Stainless Steel**: 14 gauge / 2.0mm
Maximum cutting length: 97" (8') 2,464mm
Back gauge range: 30" / 762mm
Strokes per minute, full length: 35
Number of hold down feet: 14
Motor - 230/460V, 3-Phase, 60Hz: 10 HP
Voltage (please specify): 230v/3/60 or 460v/3/60
Dimensions, (LxWxH): 116" x 27" x 56"
Floor space, gauges in position: 116" x 72" x 56"
Shipping Weight: 6,750 lbs.

OPTIONAL ITEMS:
All LM Series Shears are available in a reduced price "Performance Package" configuration. The Performance Package includes:
5 foot squaring arm
A pair of front support arms
Air operated sheet support system
Performance "R" system is for rear return
Performance "F" system is for front return
Digital Readout for 2x Back-gauge System
Squaring Arm, Five Foot with Dual Inlaid Inch/Metric Scale
Squaring Arm, Ten Foot with dual Inlaid Inch/Metric Scale
Additional Flip-up Stops for Squaring Arm (each)
Front Support Arms, Pair
T-Slotted Table with Two Front Support Arms with Inlaid Inch/Metric Scales
Additional Flip-up Stops for T-Slotted Support Arms and Table (each)
Power Back-gauge 30-Inch Travel
Protractor Attachment
Work Shadow Light LM Series
Stroke Counter (Electro-Mechanical)
Wired for CSA Canadian Electrical Standard
Replacement Blades
Increased Cutting Speeds (Please Call)
Please Contact Sierra Victor Industries at 386-304-3720 for a complete listing of optional equipment

OPTIONAL MODELS:
LM810: 8 foot x 10 gauge shear
LM810-R: 8ft x 10 ga Shear with Performance Package-R
(Rear Return Sheet Support System)

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 3 YEAR – Limited

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida