buy & sell, new & used
machinery, machine tools
not a member?
Brakes & Folding Machines
5' x 110 Ton COLE-TUVE® Hydraulic Press Brake - $RFQ
Item Number: #
5' x 110 Ton COLE-TUVE® Hydraulic Press Brake
INVENTORY BLOW OUT SALE! CALL FOR PRICE!
Standard machine described here with optional segmented upper gooseneck die and 5-way lower die
COLE-TUVE Model PBS Hydraulic Press Brakes are designed for heavy and comparatively short bending requirements. Other press brakes have two bending-length capacities: overall and between housings. However, on the Model PBS the tow are the same, so bending length is not limited for some applications to the pass-through distance between housings as it is on other press brakes. Therefore there is no need to pay the extra cost of a longer brake to get the pass through capacity that is required.
On the Model PBS, power to the ram is supplied by a single hydraulic cylinder so ram parallelity during decent and return is assured; therefore there is no need for the components which are used on other type press brakes to assure ram alignment and which increase cost. Two auxiliary non-powered cylinders are used for guiding the ram. With this system, gibs and other costly and maintenance intensive guiding systems are eliminated.
The frames of the machines are constructed of structural steel and plate weldments so that dynamically solid and highly stable units result. The standard bed is wider than on other similar purpose machines.
The design of these machines provide a very large shut height which can accommodate not only normal requirements but can even be adjusted to the maximum indicated for each machine.
Power is supplied by an amply-sized central hydraulic system with the appropriate controls. Operation is from a movable pedestal on a trailing lead. Check valves protect the hydraulic system against overload.
Upper goose-neck die and lower 5-opening die
Upper die holder
Emergency stop control
T-slots arranged across the narrow dimension of the bed (or optionally in other patterns) and holes drilled and tapped for lower die retaining clamps
Capacity: 110 Tons
Max. Pressure: 3,813 PSI
Bending Length: 60"
Distance between frames: 60"
Maximum Stroke Adjustable: 11.8"
Ram Speeds (inch per minute)
Maximum die space, ram up, bed down: 12.8"
Bed size, front to back x left to right: 19.7" x 60"
Diameter of hole in center of bed: 3.9"
Motor: 10 HP
Dimensions (LxWxH) approx.: 99" x 40" x 88"
Approx. Weight: 5,500 lbs.
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by
Sierra Victor Industries
located in Port Orange, Florida
Find more listings for
Cole-Tuve Press Brakes,
New Press Brakes
Press Brakes in Florida
Contact the Seller
Sierra Victor Industries
610-B Oak Place
Type the code shown*:
* Mandatory field
Note: For security all enquiries may be monitored
* Report advert as sold or incorrect details
All fields are required
Your Phone Number
Help / FAQ
Terms & Conditions
Copyright © MachineSales Inc. All Rights Reserved.
All transactions on MachineSales are charged in USD$ from a US-based merchant account