* * * N E W 1 9 7 8 * * *

BUILT FOR DANISH MINT

Roll Dimension 480 mm Diameter x 350 mm wide (2 HI) and 400 mm x 150mm x 350

mm wide (4 HI)

This Mill functioned in three different ways:

1. As a 2 Hi Reversing Breakdown Mill
for continuous cast copper alloys
2. As a 2 Hi Clad Mill for Steel & Copper
3. As a 4 Hi Reversing finish mill for copper alloys

MILL EQUIPPED WITH:
Roller Bearings
Hydraulic Screw Downs
Automatic gauge control
Entry & Exit Vollmer Gauges
Back Up Roll Drive
Siemens/Bosch Solid State Electrics
Mill Speed 7.5, 75-150 m/min thru gear box
Main Mill Motor 245 H.P 400 V D.C. 481 amps, 1420 RPM
Separating Force: 2 High Clad 550 Tons
2 High Breakdown 150 Tons
4 High Finish 450 Tons

2 SETS OF WINDERS, EACH SIDE USE 1 MOTOR WITH INTERCONNECTING GEAR BOX:
Winders for 2 HI operation
Cap 350 mm width 1300 mm ID - 1600 mm O.D. 2500 Lb.
Speed 48.3 483, 966/2320 RPM thru gear box
Horse Power 200, 400V D.C., 421 AMP, 966 RPM
Tension 1,300# to 10,000#
Hydraulic Holddown Roll

WINDERS FOR 4 HI OPERATION:
Capacity 350 mm Width, 400 mm ID - 1000mm O.D
2500 LB WT
Horse Power 200, 400 V D.C. 421 AMP, 966 RPM
Speed 48.3, 483, 966/2320 RPM thru gear box
Hydraulic Holddown Roll

CAPACITY AS USED FOR 2 HI BREAKDOWN MILL AT DANISH MINT:
Cupro Nickel 200mm wide
Start Thickness 12-15 mm
Finish at 5mm
Speed 7.5, 75, 150 meters per minute thru gear box
Length of Coil 48 m

CAPACITY AS USED AS 4 HI FINISH MILL AT DANISH MINT:
Cupro nickel 200 mm wide
Start Thickness 5 mm
Finish at 1.25, 1.35, 1.5, 2 mm
Speed 7.5, 75, 150 meters per minute
Length of Coil 144m

CAPACITY AS USED AS A 2 HI CLAD MILL AT DANISH MINT:
Steer and copper 100 mm wide
6 mm Thick Steel input
2 Strips of .3 mm copper
Finish thickness of material 1.3 mm
Speed of clad operation 2 - 20/40 m/min


Production 2000 tons per year based on 1850 hours


INCLUDES: Cooling systems, roll changer, rolls, spare

parts, controls.

Mill in excellent condition.

This machine is listed for sale by National Machinery Exchange Inc located in Newark, New Jersey