A) Each Electrical Arc Furnace

Manufacturer:..........Kishida Japan
Year of Make:...............1981
Production capacity:........... 275,000T/Y
Type of pouring:............. Tilt (Inclined system)
Diameter of the shell:.........ID 5300mm
Height of the shell:..........2225mm
Slagging and pouring angles:.....Front tilting 45 , tilting behind :10
Modifications and refurbishings:
Year : 2006
Type of Modification : New EAF Shell/Roof/Cooling Box and Jet Box with

supersonic Burner(Injector) by PTI USA
Description of the functioning or type of EAF: AC Transformer, spout tapping

and alternative energy by injectors.


B) TRANSFORMER

Nominal power:............ 27500 KVA + %
Primary voltage:............ 69 kV
Secondary voltage:........... 11.4 V


C) Continuous casting machine for billets

Manufacturer.............Sumitomo Japan
Construction Year :..........1985
Modifications and refurbishings
Year : 2006
Type of Modification: Billet size increase to 130 x 130mm


D) AUXILIARY EQUIPMENT AND SPARES EQUIPPING THE CASTING MACHINE:

Number of tundishes................. Total 8 sets including tundish car

and covers
Number of pumps for water and scale.......... Mold cooling- 2 water pump with

1,719GMP and 125HP Spray cooling- 3 water pump with 1,190GMP and 125HP
Number of devices for billet clamping and transportation..2 crane and 2

clamping device.

E) COOLING WATER TREATMENT SYSTEM:
FURNACE CIRCUIT:

Number of motor pumps ................. #1 x2EA 100HP , #2 x2EA 100HP
Number of cooling tower complete with , Number of motor pumps on duty. 1

cooling tower 500 M3 for 2 EAF, 3 pump, 1 stand by
Number of water softener......one system of water sofener for EAF dust

collecting and casting machine.
F) Bar Mills #1 and #2
#1
Diameter Range : D19 ~ D43
Number of Stands and Passes : 12 stands, 12 pass
Type of Fuel for reheating furnace : fuel oil
Max billet size and length for reheating furnace : 130m x 130m x 2.75m
Reheating furnace capacity / hour 65~70t/Hr for warm charge(billet temp>500

degree C 40t/Hr for cold charge
Temperature and number of zones for reheating furnace Upper 2 zone(preheat

& heating) Lower I holding zones
Actual rolling speed: Max..... 10m/sec
Cooling bed dimensions..... 60ML x 5.7m width , 75mm ptich
Cold Shear.......... 100mm x 6P air drive pulley , belt , fly wheel
Cooling Water.......... Heating furnace use under ground water,
Rolling mill cooling water will be

increased for bigger rolling capacity.
#2
Diameter Range : D10 ~ D19
Number of Stands and Passes : 19 stands, 19 pass
Type of Fuel for reheating furnace : fuel oil
Max billet dia and length for reheating furnace : 130mm x 130mm x 2.45m
Reheating furnace capacity / hour 60 t/hr for warm charge, 40~45 t/hr for

cold charge
Temperature and number of zones for reheating furnace Upper 2 zone(preheat

& heating) 1250 degree C Lower I holding zone (1,000 degree C)
Actual rolling speed: Max..... 12.7m/s
Cooling bed dimensions..... 72ml x 5.7m with , 58mm pitch
Cold Shear.......... 100HP x 6P air drive pulley belt , fly wheel
Cooling Water.......... Heating furnace use under ground water,

This machine is listed for sale by National Machinery Exchange Inc located in Newark, New Jersey