No. M2120,Ecotech,2"-8"I.D. Range,8"Grind Depth, 5.5HP |
|
Stock Code: |
33267 |
Price: | $RFQ |
Subcategory: | Surface Grinders CNC |
Year of Manufacture: |
2004 |
Manufacturer: |
Ecotech |
Model: |
M2120 |
Condition: | Used |
Serial No. 337 New - 2004
SPECIFICATIONS: Diameter of Bore Ground................................50-200mm (2"-8") Depth of Bore Ground - Maximum 50 - 80 Bore Diameter...................................120mm (4.72") 80 - 150 Bore Diameter..................................150mm (5.90") 150 - 200 Bore Diameter.................................200mm (7.87") Swing of Work - with Hood - Maximum......................400mm (15.75") Swing of Work - without Hood - Maximum...................600mm (23.62") Table Stroke - Maximum...................................600mm (23.62") Workhead Spindle Center to Bottom of Bed................1210mm (47.64") Swivel of Workhead - Maximum.................................30 Degrees Transverse Movement of Workhead - Maximum.................250mm (9.84") Work Speed (Infinitively Varied)..........................100 - 500 RPM Table Speed - Grinding....................1.5 - 6 m/min. (59-236"/min.) Table Speed - Dressing......................0.1 - 2 m/min. (4-80"/min.) Table Speed - Maximum..............................6 m/min. (236"/min.) Table Movement per Turn of Handwheel......................12 mm (0.47") Graduation of Wheel Feed: per Division of Feed Handwheel......................0.002mm (0.0001") per Turn of Feed Handwheel............................0.4mm (0.0157") per Division of Regulating Handwheel.................0.01mm (0.0004") per Turn of Regulating Handwheel.........................2mm (0.079") Cycles for Wheel Feed per Minute - Maximum...................30 min. -1 Periodic Wheel Feed Amount.................0.002-0.008mm (0.001-0.002") Wheel Speed (5)...........................11000/8000/6000/5000/4000 RPM Grinding Wheel Motor........................................4kW (5.3HP) Workhead Motor..............................................2.2kW (3HP) Hydraulic Pressure for Guideway Lub.............0.1 MPa (14.5 Lbf/in.2) Hydraulic Pressure for Working System......0.8-1 MPa (116-145 Lbf/in.2) Hydraulic Oil Pump............................63 l/min. (16.6 Gal/min.) Hydraulic Oil Pump Motor....................................1.5kW (2HP) Coolant Pump...................................25 l/min. (6.6 Gal/min.) Coolant Pump Motor......................................0.09kW (0.12HP) Grinder Dimensions - Actual.........................105"L x 57"W x 66"H Coolant & Parts Dimensions - x 22"W x 32"H Approximate Weight..................................3340 Kg (7496 Lbs.)
EQUIPPED WITH:
Newall Model A50 DRO 12" Scale for Wheelhead Feed Hydraulic Grinding Wheel Dresser (2) Spindles: (1) 16" High Speed Spindle (1) 21" Low Speed Spindle 4" & 5-1/2" Grinding Wheel Extensions (6) Pullys for Grinding Spindle Speeds Wheel Balancer Coolant Tank Books, Manuals & Drawings
*Preliminary Specifications Subject to Verification.
This machine is listed for sale by Liberty Machinery Company
located in Lincolnshire, Illinois
|