Machine Tools > Lathes & Turning Centers > Precision Lathes    < Back

17" x 40" - 80" SHARP® CNC Precision Lathes - $RFQ

Item Number: #00083146
17&quot; x 40&quot; - 80&quot; SHARP&#174; CNC Precision Lathes

17" x 40" - 80" SHARP® CNC Precision Lathes
Stock Code:  1740NC
Price: $RFQ

Precision Lathes

Manufacturer:  Sharp
Model:  1740NC
Condition: New

CNC flat bed lathe with FAGOR 8055iA TC control with conversational programming' 3.38” spindle bore, D1-8 camlock spindle built on one piece casting bed
Flat bed CNC lathe with FAGOR 8055iA control and drive system
User friendly conversational programming language
Different modes of operations available
Operate as manual lathe with electronic handwheels,
Operate as a full CNC lathe with programmable speed, using conversational language or G code language,
Operate semi automatically, combining manual and CNC operations
Teaching in mode
OEM 2-axis CNC, 12 lin. TFT CNC Chassis & Floppy driver. Std 20 inputs/12 outputs
D1-8 camlock spindle, 3-3/8” spindle bore
Geared head with 3 steps speed change, programmable speed
One Piece Cast Meehanite Bed
10 HP Spindle Motor

CNC CONTROL 8055i/A by Fagor:
Manual – the lathe is operated like a conversational lathe, using the 2 electronic handwheels in the front to move the axes. In addition if offers convenient features such as digital readout and constant surface speed.
Semiautomatic – it allows 2 axes to be controlled with the cranking of 1 handwhel, the machinist can cut arcs, tapers and chamfers.
Automatic – with ability to execute any program, plus background editing capability. Powerful tool inspection mode included as well as full program control from keyboard programs to choose from, the 8085i/A will control everything from start to finish.
Single step – the machinist can go through all or part of the process by executing the program step by step.

Conversational – icon key with conversational graphic screens for easy operator data input. No prior programming experience needed
G-code – this programming enables utilization of some sophisticated features such as parametric or variable programming. Auto –prompt via the help key prompts operator though graphic & text help screens.

Teach-in mode – the first part can be made manually while the control records the corresponding program, and then additional parts can be made in automatic mode.
Canned Cycles – by selecting the associated ICON key or G-code, the CNC will prompt you through all canned cycles including Turning, Facing, Grooving and Threading, All equipped with a Thread Repair Canned Cycle.
On-board profile editor for easy blue print programming. Simply enter the data right off the blueprint, the CNC automatically creates the program including complex profiles.
Solid graphic as standard with tool shape representation standard and available for use in both Execution and Simulation mode, Also with line graphic capability.

Back Plate
Coolant pump equipment
Automatic lubrication system
Timing belts
Safety guard ( include: Rear Splash guard, 2-Sliding doors in front )
Electrical box to suit CNC Turning Control
Safety Chuck guard
Mounting block for toolpost
Halogen Work Lamp
Encoder for Spindle RPM
Electronic handwheel X & Y Axis
Main motor 10HP
Electrical 4-way toolpost
Toolbox and adjusting tools
Center sleeve MT#7 x MT#5
Two dead centers
Camlock spindle wrench
Screw driver
Spanner ( double-ended wrench )
Hexagonal wrench
Operation manual

Swing over bed: 17-5/16”
Swing over cross slide: 7-1/2”
Height of Center: 8-5/8”
Swing Over Gap:26"
Distance between centers
40" (1740NC)
60" (1760NC)
80" (1780NC)
Max. Turning Length: 35.14”

Width of Bed Ways: 13"
Total Length of Bed: 78"
Swing Over Gap: 26"
Length of Gap: 11-3/4"
Width in front of Face Plate: 7-1/2"

Spindle Nose Type: D1-8 Camlock
Spindle Bore: 3-3/8”
Bar Capacity: 3-1/4”
Taper of Spindle Bore: MT#7
Taper of Center: MT#5
Spindle Speeds (3 steps): 10-84 rpm, 45-380 rpm, 240-2,000 rpm
Bearing and Size: 3 Points Supported
2 Taper Roll Bearing #32024 & #32022; 1 Ball Bearing #6021 (Rear End): —

Cross Slide Travel (X axis): 11"
Ballscrew Diameter (X axis): 1"
Rapid Travel (X axis): 236 in/min.
Axis Motor (X axis): Yasakawa 200V 0.9Kw; AC Servo
Driver (X axis): Yasakawa
Longitudinal Travel (Z axis): 36-1/4”
Ballscrew Diameter (Z axis): 1-1/2”
Rapid Travel (Z axis): 315 ipm
Drive Motor (Z axis): Yasakawa 200V 1.3Kw; AC Servo

Quill Diameter: 3"
Quill Taper: MT#5
Quill Travel (graduated): 6-5/16”

Pump Motor: 12W, 1 Phase, 220V
Discharge Volume: 130c.c./min.
Discharge Pressure: 8kg/cm2
Tank Capacity: 1/2 Gal.

Pump Motor: 1/8 HP, 0.1 kw
Pump Capacity & Pressure: 6.6 Gal/min. 0.4Kg/cm2
Tank Capacity: 37 Gal

Main Spindle Motor: 10 HP
3-Phase Continuous Rating Induction Motor: —
Invertor: Yasakawa 220V 10HP

Dimensions (LxWxH): 118” X 60” X 70” (1740NC)
Machine Weight: 4,409 lbs. (1740NC)

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details