buy & sell, new & used
machinery, machine tools
not a member?
Lathes & Turning Centers
16" x 60" SHARP® High Speed Precision Lathe - $RFQ
Item Number: #
16" x 60" SHARP® High Speed Precision Lathe
CALL FOR AVAILABILITY AND BEST PRICING!
These precision lathes are built with 3” through spindle hole for handling different work pieces. The bases are made from one-piece premium castings for maximum rigidity. The LV models are equipped with Digital Variable Speed spindle systems for easy change of speed.
The spindle is mounted on 2 precision tapered roller bearings and one ball bearing. This triple bearing support system ensure accuracy and rigidity at all times.
The headstock can be adjusted for heavy irregular work piece at high speed turning to ensure vibration free operations.
Handles that are used for engaging gears are built with locking pins to prevent the handles from being knocked out of place accidentally or under heavy cutting circumstances. Repositioning of handles is done by pulling the spring-loaded handle back and then shifting.
The universal gearbox design allows easy selection of inch and metric threading by just turning the lever to the assigned position instead of changing individual gears outside the headstock.
Selection of gears at the gearbox is done by a rotational style lever that results in less movement of the gears compare with the back-and-forth shifting style lever. Less movement of the gears means less wear and greater accuracy.
For maximum stability and minimum distortion, the entire base of the machine is made out of one-piece casting. The casting is made from high quality Meehanite process to ensure high tensile strength with excellent vibration dampening features.
The gapped bed design allows extra large work piece to be chucked at the spindle when the gap is taken out.
Bedways are induction hardened and ground for durability.
Headstock gears are hardened and ground, made out of Chrom-Moly alloy steel for maximum wear.
The headstock is equipped with a job button that allows inching movement of the spindle for easy engagement of gears.
One shot lube system is installed in the apron to direct lube oil to all the
3-jaw chuck. (10”)
Steady rest with bronze tip (1/2-6”)
Face plate (16”).
Halogen work light.
Longitudinal carriage stops.
Full length Splashguard.
Swing over bed: 16"
Swing over cross slide: 8-3/4"
Swing over gap, width: 24-3/8", 10-3/4"
Distance between centers: 60"
Spindle nose type: D1-8 camlock
Spindle bore: 3-1/16"
Spindle speeds (rpm)
40-2,000 (12) (1660L)
Taper of spindle bore: MT #6
Taper of center: MT #4
THREADS & FEEDS
Longitudinal feeds-ipr (18): 0.002 - .032"
Cross feed-ipr (12): 0.001 -.0094"
Inch threads (36): 4-56 tpi
Metric& Module threads (17): 0.5-7mm
D.P. threads : 4-56mm
Leadscrew pitch, diameter: 4 tpi, 1-3/8"
Crosslide travel: 8.7"
Compound rest travel: 4.9"
Compound width: 4.5"
Bed length: 77"
Bed width: 11-3/4"
Quill travel (graduated): 5"
Quill diameter: 2-1/4"
Quill taper: MT #4
Spindle motor (220V or 440, 60,3): 7-1/2 HP
Net weight (approx.): 4,100 lbs.
3 Jaw chuck (12”)
4 Jaw chuck (16”)
Steady rest with roller jaws
Micrometer carriage stop
4 way tool post
Quick-change tool holder.
5C cullet closer
Digital Readout System
1660LV: With Digital Variable Speed spindle system
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by
Sierra Victor Industries
located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
610-B Oak Place
Type the code shown*:
* Mandatory field
Note: For security all enquiries may be monitored
* Report advert as sold or incorrect details
All fields are required
Your Phone Number
Help / FAQ
Terms & Conditions
Copyright © 2009-2014 MachineSales.com. All Rights Reserved.