Machine Tools > Lathes & Turning Centers > Precision Lathes    < Back

47" x 240" U.S. INDUSTRIAL® Precision Geared Head Engine Lat - $RFQ

Item Number: #00064022
47&quot; x 240&quot; U.S. INDUSTRIAL&#174; Precision Geared Head Engine Lat

47" x 240" U.S. INDUSTRIAL® Precision Geared Head Engine Lat
Stock Code:  USL 47240 CZ
Price: $RFQ

Precision Lathes

Manufacturer:  U-S-Industrial
Model:  USL 47240 CZ
Condition: New

This precision, medium duty geared head engine lathe incorporates hardened and precision ground bedways and wide, precision ground gears. It has a gap-bed design, large diameter leadscrew, separate feed rod and weight bearing tailstock. There are forward/reverse levers at both the apron and the head stock with rapid feed on lathe apron.
As with all U.S. Industrial lathes, it comes with a compliment of standard accessories, 3 and 4-jaw chucks, follow and steady rests, rapid travel, work lamp, a coolant system and an operator/service manual.
Unique cast-in slated bed troughs directs coolant and chips to full length
rear coolant pan.

16" 3-Jaw Chuck. Universal, self-centering with an American standard tongue and groove top jaws.
25" 4-jaw independent chuck
Steady rest - 12" capacity
4-way toolpost
Thread Dial
Work Lamp
Flood coolant system and rear tank
Inch reading dials on apron, cross-slide and compound
Manual with test certificate
40" Face plate & Dog plate
Follow rest - 7" capacity
Rapid Travel
Safety chuck shield (not shown)
Taper Attachment (included and installed on this machine)
Large spindle bore to pass 4"
Cable track wiring protection behind bed
Qty of TWO, 3 shaft supports for long lathe
(slides along bed and supports lead screw, feed rod and chuck control rod.)

Swing Over Bed: 47" (1200mm)
Swing Over Cross Slide: 24.8" (630mm)
Swing Over Gap: 55.11" (1400mm)
Length of Bedways: 236" (6000mm)
Maximum Workpiece Length with 3-jaw chuck (Longer with 4-jaw of face plate and tailstock overhang): 228" (5790mm)
Maximum Workpiece Weight, between centers (With steady rest support): 6,613 lbs.(3000 Kg)
Maximum Workpiece Weight, between centers (Without steady rest support): 2,645 lbs.(1200 Kg)
Spindle Bore: 4.134" (105mm)
Spindle Type: D1-11 Camlock
18 Spindle Speeds: 14 to 750 RPM
72 Longitudinal Feeds: .0035 to 1.52 IPR
72 Cross Feeds: 1/3 of Longitudinal values
52 Metric Threads: 1 to 240mm
56 Inch Threads: 1 to 56 TPI
43 Module Threads: 0.5 to 56mm
27 Diametral Pitch Threads: 1 to 28 DP
Compound Rest Travel: 9.05" (230mm)
Cross-Slide Travel: 15.74" (400MM)
Tailstock Taper: No. 6 Morse Taper
Tailstock Spindle Travel: 8.07" (205mm)
Main Motor HP: 15 HP (11 kw) 220V or 440V, 3-phase
Rapid Feed Motor: 0.25 HP
Coolant Pump Motor: 90 watts, 6.6 gallons per minute
Lathe Gross Weight: 22,500 lbs. (Net Weight: 19,500 lbs.)
Skid Dimensions: 331” long, 48” wide, 80” tall

Newall 2-axis Digital Readout installed
Optional 17.5” Steady Rest (8 weeks delivery)
Quickchange toolpost kit with holders
Iscar cutting tool package

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details