NEW BAILEIGH (1/2") x 10' PLATE ROLL
Made in Italy
The PR-10500-4 four roll plate bending machine has been developed over many
years through extensive R&D and is now considered one of the finest plate
rolling machines available not only today, but anywhere in the world.
A 4 roll equipped machine is the simplest and quickest rolling machine to operate thanks
to its ability to pinch the plate between the 2 central driven rolls, pre-bend
the leading edge, and roll the body of the part along with the trailing edge all
in one direction. Not only that, but it does it all in one pass! There is no
chance to lose the position of the plate due to being pinched at all times
during the rolling cycle. Therefore what you get is a professional looking piece
without all the trial and error, which would traditionally cost you time and
The 2 central driven rolls on the PR-10500-4 are rotated by heavy-duty hydraulic
motors and high efficiency planetary gearboxes coupled directly to the rolls.
This hydraulic gearbox is driven by a massive 10hp motor that operates on 480
volt three phase power.
• 1/2" mild steel capacity
• 120’’ Length
• 4 Forming Rolls
• 2 Direct-Driven Rolls
• Moveable Console with DRO
• Hydraulic material removal system standard
• Epicyclical Gear Boxes
• Hardened and Polished Rolls
• Conical Bending System
• Torsion Bars for Perfect Parallelism
• Planetary Movement of Side Rolls
Rolling Cap. (Mild Steel) .55"
Forming Width 122"
Number of Rolls 4
Driven Rolls 2
Top Roll Dia. 11.4"
Bottom Roll Dia. 10.6"
Slide Roll Dia. 8.2"
Roll Adjustment Hydraulic
Roll Speed 16 fpm. (5 mpm)
Upper Roll Dia. 8.662"
Roll Adjustment Back Hydraulic
Side Roll Dia 7"
Minimum Forming Dia 13"
Motor 10 hp.
Power 480V / 3-phase
Shipping Weight 17,600 lbs.
Shipping Dimensions 176" x 58" x 39"
*We will meet or beat virtually any price on the web. We also offer special
financing deals with integrated discounts for qualified customers.
DISCLAIMER: The information presented in the write ups and the photographic
representations of the equipment are believed to be accurate at the time the
pages are created. The information presented on the web site should not be used
for formal quotation. Price and information presented in the write ups on the
web site are subject to change without notice. Machinery Values claims no
responsibility for inaccuracies of the information presented on the pages of
this website. Please contact one of our sales representatives if you require
more information or a current formal quotation.