Machine Tools > Lathes & Turning Centers > Oil Field & Hollow Spindle Lathes    < Back

45"/60" x 62"cc Eisen, No. PA4560, Gap Bed, 6" Hole, 2-Shear Bed, 30 HP, 2013 - $RFQ

Item Number: #00089997
45&#034;/60&#034; x 62&#034;cc Eisen, No. PA4560, Gap Bed, 6&#034; Hole, 2-Shear Bed, 30 HP, 2013
 
 
 


45"/60" x 62"cc Eisen, No. PA4560, Gap Bed, 6" Hole, 2-Shear Bed, 30 HP, 2013
 
Stock Code:  38346
Price: $RFQ
Subcategory: 

Oil Field & Hollow Spindle Lathes

Manufacturer:  Eisen
Condition: Used
 
Serial No. 12091017 New - 2013

SPECIFICATIONS:
Center
Center Height..................................................22.63" (575mm)
Swing Over Bed................................................44.68" (1135mm)
Swing Over Cross Slide.........................................34.44" (875mm)
Swing Over Gap................................................62.99" (1600mm)
Gap Width from Headstock.......................................23.62" (600mm)
Distance between Centers.........................................60" (1500mm)

Bed
Width without Auxiliary Guide..................................22.04" (560mm)
Width with Auxiliary Guide.....................................25.98" (660mm)

Carriage
Cross Slide Travel.............................................26.37" (670mm)
Compound Rest Travel...........................................17.71" (450mm)
4-Way Tool Post Width...........................................8.07" (205mm)

Thread Feeds Range
Longitudinal Feed........................0.0018"/0.1 Rev. (0.045mm/2.55 Rev.)
Cross Feed..............................0.0009"/0.05 Rev. (0.023mm/1.25 Rev.)
Longitudinal Rapid Feed.............................78.74"/Min. (2000mm/Min.)
Cross Rapid Feed.......................................50"/Min. (1270mm/Min.)
Metric Thread...............................................60 Kinds (1~56mm)
Inch Thread.............................................60 Kinds (1/2~28 TPI)
Module Thread..........................................60 Kinds (0.25~14 MOD)
Diametral Pitch Thread....................................60 Kinds (2~112 DP)
Pinch of Leadscrew...............................................2 TPI (12mm)

Headstock (18) Steps Manual
Spindle Nose............................................................A2-11
Spindle Bore.......................................................6" (154mm)
Spindle Speed Step (RPM/Minute)........7, 10, 13, 17, 22, 30, 45, 60, 75, 90,
105, 125, 190, 280, 355, 410, 540, 700

Tailstock
Quill Diameter..................................................4.52" (115mm)
Quill Travel....................................................7.87" (200mm)
Inner Taper of Quill....................................................MT #6
Bearing Surface on Bed Ways....................................19.68" (500mm)

Support Capacity
Capacity......................................................6" Spindle Bore
Load between Centers w/o Steady Rest.....................7,700 Lbs. (3500kgs)
Clamp Capacity Steel Body 4-Jaw Chuck........@ 20" off face of chuck 5060 Lbs

Motor
Main Spindle Motor..............................................30 HP (22 KW)
Coolant Pump Motor..........................................0.125 HP (0.1 KW)

Dimensions
Catalog Dimensions.............................3750mm L x 1800mm W x 1325mm H

*Preliminary Specifications Subject to Verification.
 
This machine is listed for sale by Liberty Machinery Company located in Lincolnshire, Illinois
 
Contact the Seller
 
Liberty Machinery Company
  111 Schelter Road
Lincolnshire
IL 60069
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details