Machine Tools > Millers & Milling Machines > Knee Millers    < Back

10" x 50" SHARP® Premium Packaged Vertical Knee Mill - $RFQ

Item Number: #00084596
10&quot; x 50&quot; SHARP&#174; Premium Packaged Vertical Knee Mill

10" x 50" SHARP® Premium Packaged Vertical Knee Mill
Stock Code:  TMV-K
Price: $RFQ

Knee Millers

Table width10"
Table length50"
Manufacturer:  Sharp
Model:  TMV-K
Condition: New

10” x 50” table, 16.3” x 35” travel, 3 HP, R-8, vari speed, box ways
SHARP milling machines are constructed from certified MEEHANITE castings that provides high rigidity and excellent vibration dampening characteristics. The models are equipped with hard chromed dovetail ways or hardened and ground box ways for superior wear resistance . For almost 30 years, the SHARP mills have been one of the most reliable mills in the industry.

Premium Packaged TMV comes with Power Draw Bar standard
Premium Packaged TMV comes with 3 Axes DRO (Quill, Table & Saddle) standard to achieve best accuracy, ease of use, and productibity.
Premium Packaged TMV comes with Power Feed Table standard making your operation easier to manage.
To dissipate heat in the 3 HP motor driven head, a pair of high output fans is installed. This allows the machine to work demanding jobs for extended periods without damaging the motor, belts and bearings. A unique SHARP feature.
The motor shaft and Vari Drive pulleys are dynamically balanced, then hard-chromed. This allows a vibration free milling even at high speed
Since the Vari-speed drive system is operated by sliding the Vari Drive pulley up and down the motor shaft. The motor shaft is therefore chrome-plated, and has an oil channel that is fed by a grease fitting on the lower end for self-lubricating purpose. This ensures the sliding motion is trouble free at all times. A unique SHARP feature.
The motor shaft that drives the pulley and the spindle is subject to a lot of lateral stress. A roller bearing is installed for the lower support of the motor shaft. A unique SHARP feature.
Beside swiveling 90 degree side to side, the head can also swivel up and down by virtue of a knuckle joint design. The new design developed by Sharp uses 6 bolts, 3 each side, that fitted into a circular T-slot milled at the inside of the over arm and secured by nuts from the outside. It secured the head tightly and offered high accuracy in milling operations.
A matched pair of super-precision ABEC-7 angular contact bearings supports the spindle. The quill is CNC-ground to a mirror finish, and then chromed to fit the housing. Together, they insure spindle run out of no more than 0.00002” TIR- the best in the industry.

Column, Table and Knee:
Hardened and ground box ways on column and saddle.
Turcite coated slideways for better resistance to wear and retention of lube oil.
Certified MEEHANITE castings are used for superior rigidity and better dampening of vibrations.
Table and saddle backlash is controlled by a double-nut design that keeps the feed screw in contact with a pair of bronze nut at all times. A unique SHARP feature.
Hardened leadscrews on table and saddle for better resistance to wear.
The end of the table and saddle are mounted with thrust bearings that pre-load the feed screw, eliminating endplay for precisely controlled lateral movement.
Instead of hand scraping the top of the knee ways for oil retention, the matching underside of the saddle is hand-scraped. This extra step avoids having chips and dirt embedded in the knee ways and damages the sliding area.
"Bridgeport-style" vertical knee mill
SHARP DRO: Calculation functions, finding center of part, drilling holes on oblique line, bolt circles, power interupt, linear error compensation, milling functions, 2 year warranty.

Hardened and ground box ways
Power feed table
Power feed systems on saddle, knee
Digital Readout systems
Power drawbar
Front and rear rubber way cover
One-shot lube system
Tool Kit

Working surface: 10” x 50"
T-slot number, size: 3, 5/8"

Table travel; x-axis: 35"
Saddle travel; y-axis: 16.5"
Ram travel: 18.5"
Quill travel (Z-axis): 5.3"
Knee travel: 15.3"
Throat distance (min-max): 9.8” - 28.3"
Spindle gage line to table top: 1.6” - 16.9"

Motor: 3 HP
Wiring voltage: 220/440v, 3 phase, 60 Hz
Taper: R-8
Speed (vari-speed): 60-4,500 RPM
Quill feed (IPR): 0.0015”, 0.003”, 0.005"
Spindle Accuracy: 0.0002" TIR
Head tilt; right-to-left (each way): 90°
Head tilt up-and-down (each way): 45°

Floor area (w x d): 70" x 75"'
Height: 88"
Approx. Net weight: 3,000 lbs.


Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details