buy & sell, new & used
machinery, machine tools
not a member?
Millers & Milling Machines
12" x 58" BAILEIGH® Vertical Knee Mill - $RFQ
Item Number: #
12" x 58" BAILEIGH® Vertical Knee Mill
CALL FOR BEST PRICING!
When you need a vertical mill to hold a large job, a small wimpy mill won’t do. You need to step up to the VM-1258 from Baileigh Industrial. The VM-1258 vertical mill features a whopping 12” x 58” table, one of the largest you will find on a manual mill. This large oversized table isn’t just mounted on a wimpy machine to make it look larger. The whole machine has been built to reflect the size and weight that its table brings.
In order to build a machine this big, rigidity has to come into the equation. Baileigh industrial uses only best castings as the starting point for their mills. The stronger you make he platform the better the cutting is. From there we selected one of the best spindle packages available, with an NST 40 spindle. A larger spindle is stronger and has tighter tolerances over a longer period of time. In order to spin a heavy duty spindle like that we decide to go with a Yaskawa® inverter powered by a 5hp 220 volt three phase motor. The inverter lets the operator chose his RPM from 0 to 3800 rpm. Being able to choose the correct rpm will make for longer lasting tooling and better cuts.
Movement on the three axis are powered to make it easier on the operator. The X and Y axis also has a Mitutoyo® digital read out as a standard feature. No need to install it yourself, it is already done at the factory. The X and Y axis also have square slide ways with covers and ball screws for the best movement available. A flood coolant system, air draw bar, and central lubrication system are all factory installed on the VM-1258.
MADE IN TAIWAN
Table size (L/W): 58” / 12”
Table Load Capacity: 770 lbs
T-slot Size: 3 @ .625”
Travel - Manual X-axis: 36.61”
Travel - Manual Y-axis: 15.74”
Travel - Manual Z-axis: 17.71”
Travel - Auto X-axis: 36.22”
Travel - Auto Y-axis: 14.96”
Travel - Auto Z-axis: 17.71”
Spindle Taper: NST #40
Spindle Speed: 80 - 3,800 rpm
Spindle Feed Per Rev.: .0035” / .07” / .14”
Spindle Diameter: 3.93"
Spindle Head Swivel: 45 deg. (R&L / F&R)
Spindle Travel: 5.51"
Spindle Nose to Table (min/max): 1.37” / 19.09”
Spindle Center to Column (min/max): 5.11” / 21.65”
Cross Travel of Ram: 16.53”
Horizontal Rotation: 360 deg.
Motor Spindle: 5 hp
Motor Coolant Pump: 1/8 hp
Power Requirement: 220v / 3 phase
Shipping Dimensions: 70” / 61” / 91”
Shipping Weight: 3,740 lbs
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by
Sierra Victor Industries
located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
610-B Oak Place
Type the code shown*:
* Mandatory field
Note: For security all enquiries may be monitored
* Report advert as sold or incorrect details
All fields are required
Your Phone Number
Help / FAQ
Terms & Conditions
Copyright © 2009-2014 MachineSales.com. All Rights Reserved.