buy & sell, new & used
machinery, machine tools
not a member?
Presses & Stamping Machines
HPM 7000 Ton Fast Traverse Hydraulic Press - $550,000
Item Number: #
HPM 7000 Ton Fast Traverse Hydraulic Press
Year of Manufacture:
Stock Number: 73577
Serial No. 51-244 Age: 1951
Condition: Very Good
Vertical, Downward-Acting, Open rod Type with closed Top Pedestal Type Bed. Platen Guided on Four Column with 360 degree Split Bronze Bearing.
Platen - actuated by one single acting main ram and two double acting booster pullback rams. Pressure is applied to area of main ram and forward area of both auxiliary rams simultaneously. This press was used as a Rubber Pad Press.
Capacity 7000 TON (62,300 KN)
Main Ram 74" (1879.6mm)
2 Pullback Rams 21" x 18" (533.4mm x 457.2mm)
Pressing Surface Platen at Sides(L-R x F-B) 54" x 72" (1371.6mm x 1829mm)
Pressing Surface Bed at sides (L-R x F-B) 54" x 115" (1371.5mm x 2921mm)
Pressing Surface Platen & Bed at ends (L-RxF-B) 72" x 144" (1828.8mm x 3658mm)
Pressing Surface Clearance between rods (L-RxF-B) 54" x 72" 1371.6mmx 1829mm)
Daylight 44" (1117.6mm)
Travel Max 28" (711.2mm)
Ram Speeds Closing 238 IPM (6042mm per minute)
Ram Speed Pressing 8.6 IPM (218.44mm per minute)
Motor 200 HP 460/3
Opening 238 IPM (6045mm per minute)
Height Above Floor 25' (7620mm)
Depth below floor 116" (2946.4mm)
Floor Space 146" x 126" (3708.4mm x 3200mm
Weight 630,000 LB (2,803KN)
2 Hydraulic Pumps R200/ 2740 PSI.
Hydraulic Tank 156" x 43" W x 72" High mounted on top.
No drawings available.
Previously used to manufacture airplane parts.
1 Column Nut is missing.
MACHINE HAS BEEN REMOVED FROM THE PLANT
Price includes loading on trucks.
Preperation for ocean shipping and delivery to ports $115,000 USD.
We can quote converting this press for Forging Press work.
The HPM 7000 ton press as currently equipped, is suitable for the original design
as a rubber pad press. It would also be suitable as a high tonnage HydroForm
clamp press for the automotive and appliance industries. The HPM Pressing
speed is only 8.6 IPM, powered by a 200 HP electric motor. The press is
currently too slow for metal working and forging applications. With the
quoted upgrade, pressing speed is increased to 27 IPM, 37 IPM or 46 IPM,
depending on the number of pump/motor groups. Fast return can be increased
from 238 IPM to 649 IPM, if the prefill valves will pass the amount of fluid.
These speeds will make the press suitable for applications including:
General metal forming
Open & closed die forging
Shallow and deep draw
Flattening and/or bending
Upgrade budget cost for variable forge speed 27 IPM = $566,200,
For 37 IPM = $732,300, For 46 IPM $931,600 IPM
Please contact us for detail estimate from the engineering firm.
This machine is listed for sale by
located in PERRY HALL, Maryland
Contact the Seller
8756 Magnolia Rd
Type the code shown*:
* Mandatory field
Note: For security all enquiries may be monitored
* Report advert as sold or incorrect details
All fields are required
Your Phone Number
Help / FAQ
Terms & Conditions
Copyright © MachineSales Inc. All Rights Reserved.
All transactions on MachineSales are charged in USD$ from a US-based merchant account