Machine Tools > Honing & Lapping Machines > Hones - Vertical    < Back

8" Dia. 12" Stroke Sunnen CK-21-D CYLINDER KING HONE, MICROPROCESSOR CONTROL, TOOLING - $RFQ

Item Number: #00080431
8&quot; Dia. 12&quot; Stroke Sunnen CK-21-D CYLINDER KING HONE, MICROPROCESSOR CONTROL, TOOLING
 
 
 


8" Dia. 12" Stroke Sunnen CK-21-D CYLINDER KING HONE, MICROPROCESSOR CONTROL, TOOLING
 
Stock Code:  153381
Price: $RFQ
Subcategory: 

Hones - Vertical

Maximum diameter8"
Stroke12"
Year of Manufacture:  1997
Manufacturer:  Sunnen
Model:  CK-21-D CYLINDER KING
Condition: Used
 
  Sunnen Model CK-21 Vertical Hone
 
"Computer Controlled For Precision Performance"
 
 S/N: 2WI-1136      New: 1997
 
Specifications:
 
Max. Bore Dia. (With CV Type Tooling - Not Included): 8"
 
Spindle:
4 H.P.
Two Speed Ranges - Manually Adjusted
Low Range 90-240 RPM Adjustable in 10 RPM Increments
 Through Operator Interface
High Range 250-550 RPM Adjustable in 10 RPM Increments
 Through Operator Interface
 
 
 
Stroker:
3/4 h.p.
Strokes per Minute: 40-100
Stroke Length Range: 3/4" to 12"
 
(Note:  Stroke speeds exceeding 70 RPM are not recommended
 for stroke lengths over 6.25".  Severe Machine Damage Could
 Result!!!)
 
Adjustable in 10 SPM Increments from Operator Station.
No Belts to Change.
 
Feed System:
Max. Operating Torque: 10 FT-LB
Feed system: 100% Computer Controlled
Max. Feed Rate: 0.030 IN/MIN
"Sizeloc" Zero Shutoff
 Auto Retract at End of Cycle.  Auto Rapid at Beginning of Cycle.
 Spindle Pre-Load (Feed Start Point) Set at Operator
 Interface.  Always the Same Amount.  Operator and
 Cycle Independent for Constant Performance.
 Two Stage Feed Profiling, Beginning or End of Cycle
Feed Reduction.
 Spark Out Option
 Tool Selection Menu from Operator Interface
 Electronically Protected Overload System is Operator
Resettable.  Backed Up by a Common Shear Pin.  No
Gears to Replace.
 
 
Honing Fluid System:
 Honing Fluid System is Synthetic Coolant Compatible.  Check
with factor for Filter Recommendations.
 Longer Life Progressive Cavity Pump
 Flow Rate- 5 Gal/Min
 Pullout Sump for Easy Cleaning
 Canister Operating Pressure Gage for Filter Change Planning
and Diagnostics.
 Auto/Manual Start of Coolant
 Remote Manual Oil Control Valve.
 Fully Adjustable Nozzle.
 Reservoir Holds Max. 63.5 Gallons to 38 Gallons Min.
 
General Requirements:
Dry Weight:  3,000 LBS
Dimensions: Approx. 86" L x 87" W x 88" H
Compressed Air: 80 PSI
Maximum Part Weight: 1,500 Lbs.
Work Area Envelope: 57" x 35 x32"
Elecrics: 220 Volts, 3 Phase, 60 Cycle
 
Equipped With:
Tooling Set-Up
 
** Beautiful Condition & Appearance - Original Paint **
** Inspect Under Power in our Harriosn, NJ Warehouse **
 
This machine is listed for sale by Machinery Values Inc. located in Harrison, New Jersey
 
Contact the Seller
 
Machinery Values Inc.
  401 Supor Blvd
Harrison
NJ 07029
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details