Machine Tools > Gear & Gear Cutting Machinery > Gear Hobbers - Horizontal    < Back

BARBER COLMAN MODEL 16-36 "MULTICYCLE" UNIVERSAL GEAR HOBBER - $RFQ

Item Number: #00096395
BARBER COLMAN MODEL 16-36 &quot;MULTICYCLE&quot; UNIVERSAL GEAR HOBBER
 
   


BARBER COLMAN MODEL 16-36 "MULTICYCLE" UNIVERSAL GEAR HOBBER
 
Stock Code:  80143
Price: $RFQ
Subcategory: 

Gear Hobbers - Horizontal

Maximum gear diameter16"
Year of Manufacture:  1976
Manufacturer:  Barber Colman
Model:  16-36
Condition: Used
 
BARBER COLMAN MODEL 16-36 "MULTICYCLE" UNIVERSAL GEAR HOBBER
RACO Stock Number R080143 NEW 1976

This Barber Colman Model 16-36 Gear Hobber is made to perform all
cutting motions in either Automatic Square-Cut or Plunge-Cut cycles.
It can produce worm gears as well as spur and helical gears and spline
shafts with fully automatic operational efficiency, without the
operator's attention. All that is required of the operator is the
loading of the blanks, the pressing of the start button, and the
removal of the finished parts.

This machine is of the more modern design, with an extended overarm
to allow holding of longer parts between centers, a 4-1/8" work spindle
bore, an Automatic Hobshift for extended tool life, and anti-friction
bearings in both the work spindle and hob spindle.

The machine is in excellent condition, having been used in the shop
of a high quality gear manufacturer, where it has been regularly and
professionally maintained. It was an integral part of the regular
production operations, until the entire gear department was closed,
making this fully functional machine and others available.

SPECIFICATIONS:
MAX. RATED WORK DIAMETER --------------------------------------- 16"
MAX. PITCH, FOR ONE CUT IN STEEL -------------------------------- 6 DP
MAX. TRAVEL OF HOB CARRIAGE ------------------------------------ 36.5"
MAX. DISTANCE FROM WORK SPINDLE FACE TO TAIL CENTER ---- 64"
DISTANCE WORK SPINDLE FACE TO C/L OF HOB SPINDLE -------- 39.5" MAX.
DISTANCE WORK SPINDLE FACE TO C/L OF HOB SPINDLE -------- 3.5" MIN.
DISTANCE C/L HOB SPINDLE TO C/L WORK SPINDLE -------------- 9.5" MAX.
DISTANCE C/L HOB SPINDLE TO C/L WORK SPINDLE -------------- 0.5" MIN.
DISTANCE C/L OF TAILSTOCK TO UNDERSIDE OF OVERARM ------ 8"
MAX. VERTICAL FEED DISTANCE ------------------------------------ 1/2"
MAX. TOTAL VERT. DISTANCE (FEED PLUS CLEARANCE TRAVEL) - 7/8"
WORK SPINDLE BORE DIAMETER ------------------------------------ 4-1/8"
MAXIMUM SWIVEL ANGLE SETTING, LEFT OR RIGHT -------------- 45 DEGREES
MAXIMUM HOB DIAMETER ------------------------------------------- 5"


11 SPEEDS FROM 75 TO 425 RPM (WHEN EQUIPPED WITH SUITABLE GEARS)
24 AXIAL FEEDS FROM 0.0075 TO 1.125 IPR (WHEN EQUIPPED WITH
SUITABLE GEARS)
25 VERTICAL FEEDS FROM 0.0196" TO 0.500"
FLOOR SPACE (APPROX.) 102"L X 60"W X 76"H

EQUIPMENT:
TWO FULLY AUTOMATIC CYCLES - PLUNGE FEED & SQUARE CUT CYCLE
ANTI FRICTION BEARINGS IN BOTH THE WORK SPINDLE AND HOB SPINDLE
DOUBLE THREAD INDEX WORM
AUTOMATIC HOBSHIFT
POWER DOWNFEED
POWER WORK CLAMPING CYLINDER
UNIVERSAL ADJUSTABLE TAILSTOCK WITH POWER CENTER
C-TYPE END BRACE ALLOWING GREATER WORKPIECE LENGTH
DWELL TIMER
ONE HOB ARBOR
35 CHANGE GEARS (ADDITIONAL AVAILABLE UP TO A COMPLETE SET)
BIJUR LUBRICATION
VERTICAL FEED DRIVE 0.25 HP D/C VARIABLE SPEED MOTOR
COOLANT PUMP A.C. MOTOR
HYDRAULIC PUMP & TANK
RAPID TRAVERSE DRIVE 2 HP
MAIN DRIVE 460V-a-60 HZ MOTOR AND ELECTRICAL CONTROLS


WEIGHT: 8400 LBS.


DIMENSIONS (IN.): 114 X 50 X 88
 
This machine is listed for sale by Raco Industrial Corporation located in Des Plaines, Illinois
 
Contact the Seller
 
Raco Industrial Corporation
  2100 S.Wolf Rd
Des Plaines
IL 60018
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details