Machine Tools > Lathes & Turning Centers > Gap Lathes - Removable Gap    < Back

26" x 80" GMC® Heavy Duty Precision Gap Bed Lathe - $RFQ

Item Number: #00062160
26&quot; x 80&quot; GMC&#174; Heavy Duty Precision Gap Bed Lathe

26" x 80" GMC® Heavy Duty Precision Gap Bed Lathe
Stock Code:  GT-2680
Price: $RFQ

Gap Lathes - Removable Gap

Manufacturer:  Gmc
Model:  GT-2680
Condition: New

ISO 9001 certified
Large spindle bore 4-1/8”
Adjustable mechanical spindle clutch for spindle start Forward/reverse and brake, spindle brake without stop the spindle motor to longer motor 8 times life than most other Brand lathe with electrical start/stop.
4-way rapid traverse on Longitudinal and cross ways
All dual inch/metric dials.
solid cast iron machine base
Heavy Duty guideway width 15-1/2”
Heavy Duty main motor 15 HP
12 spindle speeds from 36-1,600 rpm
Oil pump on apron for all ways and leadscrews
Threading and feeding rate change without changing gears
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box

Free Taper turning attachment, installed
Longitudinal kick-out carriage stop system for GT-2660 & GT-2680 only
12” 3-jaw chuck with top reversible jaws
20” 4-jaw chuck
25” Face plate
10” drive plate
4-3/4” – 10-1/4” large steady rest
1”-3” follow rest
Removable gap
4-way tools post
Foot brake
Halogen Work light
Coolant system
Oil pump on apron for lubrication to all ways and leadscrews
Full length rear splash guard for GT-2660 & GT-2680 only
Section splash guard on Apron for GT-26120 only
(2) dead centers and (1) reducing sleeve
Thread chasing dial
Tool box

Max. swing over bed: 26"
Max. length of workpiece: 80"
Max. swing over cross slide: 16-1/2"
Max. Swing in gap: 34-1/4"
Width of Bed: 15-1/2"
Effective length in gap to spindle: 9"
Effective length in gap to chuck jaws: 6"
Spindle bore: D1-8, 4-1/8”
Taper of spindle center: MT6
Spindle speeds: 36-1,600 rpm / 12 steps
Longitudinal feeds: 0.0023-0.093 IPR, 65 kinds
Cross feeds: 0.0011-0.04 IPR, 65 kinds
Inch threads: 13 & 28-2 TPI, 27 kinds - 28,14,7,3-1/2, 27, 24, 12, 6, 3, 22, 11, 5-1/2, 2-3/4, 20, 10, 5, 2-1/2, 18,9,4-1/2, 2-1/4, 16, 8, 4, 2, 11-1/2, 19
Metric threads: 1-14 mm , 22 kinds
Module threads: 0.5-7 mm, 18 kinds
Diameter Pitch threads: 56-4 DP , 24 kinds
Max. travel of top slide: 5-3/4"
Max. travel of cross slide: 14"
Longitudinal rapid traverse: 18 ft / min
Cross rapid traverse: 8 ft / min
Diameter of tailstock quill: 3"
Max. travel of tailstock quill: 6”
Taper of tailstock quill center: M.T. # 5
Max. weight of workpiece: 2,000 lbs.
4-way Tool Post Size: 1" x 1"
Longitudinal leadscrew diameter / pitch: Diameter: 3 — Pitch: 2 TPI
Main motor: 15 HP, 220V/440V, 3 phase, prewired on 220V
Rapid traverse motor: 1/3 HP, 220V/440V, 3 phase, prewired on 220V
Coolant pump motor: 1/8 HP,220V/440V, 3 phase, prewired on 220V
Net weight, approx.: 8,700 lbs
Overall dimensions, LxWxH: 142” x 45” x 66”

DRO for #GT-2680, NEWALL (England), 2 axis
SINO DRO for GT-2680, resolution .0001”
Leveling pad
SR5-GT-26120: 3/4” – 5” small steady rest with brass tips
SR16-GT26: 10”-16” large steady rest with brass tips
5-C Hand lever type collet closer, “JFK” USA, free install
900-0014: 33 pc 5C collet set, from 1/16 to 1-1/16” by 32ndth
Taper turning attachment, free installation
900-0050-05: Live center for tailstock MT# 5, part
2003-0005: 5pc Indexable carbide turning set
2003-0014: 3/8” carbide insert

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details