Machine Tools > Lathes & Turning Centers > Gap Lathes - Removable Gap    < Back

20" x 60" GMC® Precision Gap Bed Lathe - $RFQ

Item Number: #00062137
20&quot; x 60&quot; GMC&#174; Precision Gap Bed Lathe

20" x 60" GMC® Precision Gap Bed Lathe
Stock Code:  GT-2060
Price: $RFQ

Gap Lathes - Removable Gap

Manufacturer:  Gmc
Model:  GT-2060
Condition: New

ISO 9001 certified
Large spindle bore 4-1/8”
Adjustable mechanical spindle clutch for spindle start Forward/reverse and brake, spindle brake without stop the spindle motor to longer motor 8 times life than most other Brand lathe with electrical start/stop.
4-way rapid traverse on Longitudinal and cross ways
All dual inch/metric dials.
solid cast iron machine base
Heavy Duty guideway width 15-1/2”
Heavy Duty main motor 10 HP
12 spindle speeds from 36-1,600 rpm
Threading and feeding rate change without changing gears
Automatic kick-out longitudinal carriage stop system for GT-2040& GT-2060 & GT-2080 only
Oil pump on apron for lubrication to all ways and leadscrews
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box

Free Taper turning attachment, installed
Spindle clutch
4-way repaid traverse on carriage and cross slide
12” 3-jaw chuck with top reversible jaws
16” 4-jaw chuck
25” Face plate
10” drive plate
4-3/4” – 10-1/4” large steady rest with roller jaws
1”-3” follow rest
Automatic kick-out longitudinal carriage stop system for 60” & 80” only
Oil pump on apron for lubrication to all ways and leadscrews
Removable gap
4-way tools post
Foot brake
Halogen Work light
coolant system
Full length splash guard
(2) dead centers and (1) reducing sleeve
Thread chasing dial
Tool box

Max. swing over bed: 20"
Max. length of workpiece: 60"
Max. swing over cross slide: 12"
Max. Swing in gap: 28"
Width of Bed: 15-1/2"
Effective length in gap to spindle: 9"
Effective length in gap to chuck jaws: 6"
Spindle bore: D1-8, 4-1/8”
Taper of spindle center: MT6
Spindle speeds: 36-1,600 rpm / 12 steps
Longitudinal feeds: 0.0023-0.093 IPR, 65 kinds
Cross feeds: 0.0011-0.04 IPR, 65 kinds
Inch threads: 28-2 TPI, 25 kinds
Metric threads: 1-14 mm , 22 kinds
Module threads: 0.5-7 mm, 18 kinds
Diameter Pitch threads: 56-4 DP , 24 kinds
Max. travel of top slide: 5-3/4"
Max. travel of cross slide: 12-1/2"
Longitudinal Rapid Traverse: 18 ft/min.
Cross Rapid Traverse: 8 ft/min.
Diameter of tailstock quill: 3"
Max. travel of tailstock quill: 6”
Taper of tailstock quill center: M.T. # 5
4-way Tool Post Size: 1" x 1"
Longitudinal leadscrew diameter / pitch: Diameter: 3" Pitch: 2 TPI
Main motor: 10 HP, 220V/440V, 3p hase, prewired on 220V
Rapid traverse motor: 1/3 HP, 220V/440V, 3 phase, prewired on 220V
Coolant pump motor: 1/8 HP,220V/440V, 3 phase, prewired on 220V
Net weight, approx.: 8,100 lbs
Overall dimensions, LxWxH: 106” x 43” x 63”

SR5-GT-2080: 3/4”-5” steady rest with brass tips
Leveling pad
DRO for #GT-2060, NEWALL (England), 2 axis, free install
SINO DRO for GT-2060 lathe, 0.0001” res., free install
5-C Hand lever type collet closer, “JFK” USA, free install
900-0014: 33 pc 5C collet set, from 1/16 to 1-1/16” by 32ndth
Taper turning attachment, free installation
900-0051-400: 6pc Aloris type quick change tool post
900-0050-05: Live center for tailstock MT# 5
2003-0005: 5pc Indexable carbide turning set
2003-0014: 3/8” carbide insert

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details