Miscellaneous Equipment > Farm Equipment > Farm Equipment    < Back

BOLENS TROYBUILT MTD CUB PTO FIELD COIL PN 1754151 OGURA MA-GT-BN/BN1/BN2 - $172

Item Number: #00056380
BOLENS TROYBUILT MTD CUB PTO FIELD COIL PN 1754151 OGURA MA-GT-BN/BN1/BN2
 
 
 


BOLENS TROYBUILT MTD CUB PTO FIELD COIL PN 1754151 OGURA MA-GT-BN/BN1/BN2
 
Price: $172
Subcategory: 

Farm Equipment

Year of Manufacture:  2016
Manufacturer:  Local Motorsport Electronics Shop
Model:  OGURA MA-GT-BN
Condition: Rebuilt
 
BOLENS PTO FIELD COIL PN 1754151 / OGURA MA GT BN1/BN2/B2 - $172 (NOTTINGHAM, NH)

REBUILDING with New Field Coil for replacing 12 volt Ogura MA GT - BN1, BN2 and B2 coils used on 17 TO 23 HP KOHLER ENGINES WITH DOUBLE PULLEY by EXCHANGE with 1 YEAR WARRANTY - AVAILABLE FOR SHIPPING on RECEIPT OF EXCHANGE CORE

SHIPPING FROM REBUILT STOCK OR TO 10 BUSINESS DAYS DURING THE BUSY SEASON AFTER RECEIPT OF YOUR FIELD COIL HOUSING

FIELD COILS FOR BOTH BN1, BN2 and B2 ARE EXACTLY THE SAME WITH THE SHAFT SIZE OF 17 AND 18 HP BN1 UNITS USUALLY 1 1/8" WITH 1 1/4 FOR THE BN2 and B2 ON LARGER ENGINES. DIFFERENCES ARE IN DOUBLE PULLEY BUSHING AND DRIVE DISK BUSHING.

REBUILDING TARGET IS 3 OHMS WITH DOUBLE INSULATION - ENCLOSURE INSULATION PLUS 200C RATED HEAVY INSULATED COPPER WIRE FOR LOWER HEAT AND BETTER FIELD MAGNETICS

TESTING A PTO CLUTCH IS EASY WITH A MULTI-METER - RESISTANCE SHOULD BE OVER 3 OHMS WITHOUT REMOVING THE PTO, JUST DISCONNECTING THE WIRE AND CHECK RESISTANCE (OHMS) TO THE FRAME OR GROUND. THE LOWER THE OHMS THE WORSE THE CONDITION BECOMES. MOST CIRCUITS ARE DESIGNED FOR 5 AMPS. UNDER 1 OHM MAY WORK INTERMITTANTLY, BUT IS SHORTING AND IN DECLINE.

RECOMMEND USING A PRIORITY ENVELOPE THRU USPS PRIORITY MAIL TO SEND OLD COIL FOR EXCHANGE AND FULL PAYMENT OF $172 BY PERSONAL CHECK. SHIPPING TO CANADA ADDITIONAL $20.00

EXCHANGE rebuilding service replaces your housing with a new coil potted in place in a stock housing and soldered to ground with positive lead thru case, as original . Old housings are then cleaned and prepared for the new field coils.

This PTO field coils is used on QT17, Hydro 1700's and Kohler engines of 17 and 18 HP AND many 20 HP PTO'S. Note: NSK bearing # 6207DU may have contributed to the overheating of PTO and is available at most bearing shops at about $35.00 On installation the recommended clearance is between .010 and .020" using feeler gauges - TARGET IS .015" WITH FEELER GAUGE

Shipping costs at net OR Local Pickup with exchange of housing- must receive your old housing for shipping rebuilt unit.

RETURN SHIPPING BY USPS PRIORITY MAIL (2-3 DAYS) INCLUDED IN PRICE - ADDED COST FOR CANADIAN SHIPMENT IS $20.00

WILL CONSIDER REBUILDING ANY OGURA FIELD COIL, SO FAR 97% SUCCESS - WILL PRICE FOR YOUR APPROVAL BEFORE REBUILDING - GENERALLY SIMILAR COSTS. NOT ABLE TO REBUILD WARNER FIELD COILS, BUT HAVE FOUND THEM ON THE INTERNET AS COMPLETE CLUTCHES FOR UNDER $300.00 - REQUIRES SPECIAL MOLD AND BONDING IN HOUSING. SEARS AND J. THOMAS ARE GOOD SOURCES

FRANK GONSALVES - 113 KELSEY ROAD, NOTTINGHAM, NH 03290 OR CALL 401 965-2221 FOR MORE INFORMATION

STANDARD CASE LAWN TRACTORS AND WOODS BELLY MOWER PTO FOR UNDER CASE LARGE TRACTORS - NEW PHOTOS
 
This machine is listed for sale by Gonsalves Machinery located in Nottingham, New Hampshire
 
Contact the Seller
 
Gonsalves Machinery
  113 Kelsey Road
Nottingham
NH 03290
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details