Machine Tools > Grinders & Grinding Machines > Face Grinders    < Back

UTMA AL805 / AL1200 CNC Programmable with Top & Face Grind in one set-up - $RFQ

Item Number: #00044813
UTMA AL805 / AL1200
CNC Programmable with Top & Face Grind in one set-up

UTMA AL805 / AL1200 CNC Programmable with Top & Face Grind in one set-up
Price: $RFQ

Face Grinders

Manufacturer:  Utma
Model:  AL805 / AL1200
Condition: New

Face and Top Grind in a single setup with backpacked wheels
5-axis CNC Controls with memory allow free programming of virtually any tooth geometry and indexing pattern
Store an unlimited number of programs on removable media cards
Vertical Blade positioning with Flat grind
Full Cabin design runs oil or synthetic coolants
Lift-Off and Shear Face Grinding
Programming to skip broken teeth and oscillate grind newly brazed teeth
Reference bar and tooth sensor for repeatable saw blade positioning
Automatic plate thickness compensation
Variable grinding wheel speed for superior finish grind quality
Metal working (ie. Braun Schweig) Geometry software & open programming (CA triple chip) software is standard

Standard Machine Includes:

Wheel flange
Heavy Flood coolant system with external level indicator
Internal sprayer for cleaning the machine
2 high-precision, low taper cup & cone mounting fixtures for bores from 5/8” to 3 1/2” Hi- intensity, low voltage machine lamp
Multi tap transformer for voltage stabilization
Small Saw Attachment

Blade Diameters 100-800mm (4–32“) or 47" for AL1200
Tooth Pitch 6 to 130mm (5.1”) or 6" max. for AL1200
Grinding Motor 1 HP
Maximum blade thickness 10mm (.375 inch)
Hook Angles -15 to +40 degrees
Grinding Wheel specs 175mm(7”) face & 125mm(5”) top x 32mm
Air Requirement 6 Bar, 85 PSI
Voltage 220/440V, 3Ph, 60Hz
Weight 900kg (1980 lbs) 1400kg for AL1200

Optional Coolant Systems

Automatic Paper roll filtration system for oil to 35 micron, 13 GPM for oil, 88 gallon tank
Cartridge Filtration System**
to 5 micron, 15 GPM, includes 2 cartridges & installation kit

Mist Extraction Systems
Required for full cabin machines, but may be supplied by customer.

Mist extraction system for use with Synthetic coolants
Mist extraction system for use with Oil coolants**, Double Centrifuge Collector with air filter

Automatic CO2 Fire Suppression System

Custom designed Kidde fire suppression unit for oil coolants. System uses sensor to automatically dispense CO2 in case of fire or extensive heat. System equipped with full control panel, battery backup, and emergency shutoffs. Carbon Dioxide is a clean, dry, non-corrosive, inert gas, which does not damage machine parts.

Other Options

Hollow Face Grinding Assembly (variable up to 50,000 RPM)
7” Index Stroke Assembly (OEM option only)
35" Maximum Blade Diameter Capacity (OEM only)
Strobe Saw Clamp Jaw Set (Beveled PVC)

Diamond Wheel-Topping 6A9 5” x 32mm** (special bond for use with oil or well filtered synthetic coolant) 240/500 grit C08055-02
Diamond Wheel-Face 12V2 7” x 32mm** (special bond for use with oil or well filtered synthetic coolant) 320 grit C23003-02

CBN Wheel - Topping 6A9 5" x 32mm

For Stellite tips
120/280 grit C08062-02
**Indicates recommended configuration for grinding carbide with Oil Coolants
This machine is listed for sale by Colonial Saw, Inc. located in Kingston, Massachusetts
Contact the Seller
Colonial Saw, Inc.
  122 Pembroke St
MA 02364
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details