Machine Tools > Presses & Stamping Machines > Extrusion Presses    < Back

1600 Ton, SCHLOEMANN, EXTRUSION PRESS WITH PIERCER, OIL HYDRAULIC DIRECT (12577) - $RFQ

Item Number: #00083103
1600 Ton, SCHLOEMANN, EXTRUSION PRESS WITH PIERCER, OIL HYDRAULIC DIRECT (12577)
 
 
 


1600 Ton, SCHLOEMANN, EXTRUSION PRESS WITH PIERCER, OIL HYDRAULIC DIRECT (12577)
 
Stock Code:  12577
Price: $RFQ
Subcategory: 

Extrusion Presses

Tonnage1600T
Manufacturer:  Schloemann
Condition: Used
 
MACHINE# 12577



SPECIFICATIONS:



MANUFACTURER: ....................... SCHLOEMANN AG (GERMANY)

TYPE: ............................... OIL HYDRAULIC DIRECT EXTRUSION PRESS

PREVIOUS USE: ....................... COPPER TUBE (SUITABLE FOR OTHER METALS)

NO. OF COLUMNS: ..................... 4

RATED EXTRUSION CAPACITY: ........... 1600 METRIC TONS

BILLET SIZE (COPPER):

- DIAMETER: ........................ 177mm (7")

- LENGTH: .......................... 430mm (17")

- WEIGHT: .......................... 92 KG (200 LB.)

MAIN RAM DIAMETER: .................. 176mm (7")

HYDRAULIC PUMPS:

- MANUFACTURER: .................... REXROTH

- QUANTITY: ........................ 3

- MOTORS (EACH): ................... 240 kW, 400 VOLTS, 3 PH, 50 HZ

- MODEL: ........................... A4 VS0 500 E0L

- FLOW RATE: ....................... 500 LITER/MIN. FOR EACH PUMP

- MOTOR YEAR OF MAKE: .............. 2008

- OIL TANK CAPACITY: ............... 10,000 LITERS (2640 GAL.)

CONTROLS: ........................... ALLEN BRADLEY

ORIGINAL YEAR OF MANUFACTURE: ....... 1965

YEAR OF TOTAL REBUILD: .............. 2008

BILLET FURNACE:

- MANUFACTURER: .................... RIPOCHE (FRANCE)

- YEAR OF MANUFACTURE: ............. 1995

- BILLET DIAMETER: ................. 177mm (7")

- BILLET LENGTH: ................... 430mm (17")

- CAPACITY: ........................ 1600 KG/HR. (3527 LB./HR.)

- FUEL: ............................ NATURAL GAS 9900/Kcal/Nm3

- GAS PRESSURE: .................... 2 BARS

- BILLET TEMPERATURE: .............. 900 DEG. C (1650 DEG. F)

- PRECISION TEMPERATURE @ 900 DEG. C +/- 10 DEG. C

- CONTROLS: ........................ TELEMECANIQUE

- AIR PRESSURE: .................... 4 BARS MINIMUM, 5-7 BARS NORMAL

- MAXIMUM NO. OF BILLETS IN FURNACE: 28



THE PRESS AND ALL COMPONENTS ARE INSTALLED AND OPERATIONAL

THE PRESS WAS REBUILT IN 2008 INCLUDING THE FOLLOWING:



HYDRAULICS:



THE SUPPLY OF 1 OFF MAIN AND ANCILLARY PUMP MOTOR SETS; SKID MOUNTED ASSEMBLED



TESTED AND PAINTED COMPRISING OF:



3 OFF NEW A4VSO500E02 PUMPS, DRIVEN BY 3 OFF-200 KW 400V 3PH 50 HZ ELECTRIC



MOTORS, EACH DELIVERING 500 L/MIN AT 210 BAR, ANCILLARY PUMP/MOTOR SET



DELIVERING 75L/MIN AT 210 BAR AND CIRCULATING FILTER/COOLING PUMP MOTOR SET.



1 OFF MAIN PRESS CONTROL MANIFOLD ASSEMBLY, TESTED AND PAINTED TO BOSCH



REXROTH STANDARDS.



1 OFF CONTAINER AND MANDREL CONTROL MANIFOLD ASSEMBLY.



1 OFF ANCILLARY VALVE MANIFOLD ASSEMBLY COMPRISING OF A 7 STATION CETOP 5



VALVE MANIFOLD ASSEMBLY TO OPERATE THE BILLET TRANSFER, BILLET LOADER, DUMMY



BLOCK PUSHER; DIE LOADER; DUMMY BLOCK, SHEAR/SEPARATE AND FLAP ACTUATORS.



TO DESIGN AND MANUFACTURE 1 OFF HYDRAULIC TANK; COMPLETE WITH FITTINGS TO



SUIT EXISTING PRE-FILL VALVE POSITIONS.



ELECTRICALS:



TO DESIGN AND MANUFACTURE OF PLC PANEL, TO INCLUDE ALLEN BRADLEY SLC SERIES



PROCESSOR.



TO DESIGN, SUPPLY MANUFACTURE OF SEPARATE DESK INCLUDING ALLEN BRADLEY TOUCH



SCREEN.



TO SUPPLY PLC AND ALLEN BRADLEY RS VIEW SCADA SOFTWARE.



TO SUPPLY PLC AND SCADA SOFTWARE, PROGRAMMING AND TESTING IN U.K. TO INCLUDE



CONTROL PROGRAM FOR PRESS AND MANAGEMENT INFORMATION SYSTEM



FOR THE SUPPLY OF CABLES.



TO DESIGN, SUPPLY AND MANUFACTURE 3OFF MAIN MOTOR STARTER PANELS INCORPORATING



1000 AMPS INCOMING BREAKER AND CONTAINER HEAT CONTACTOR



OTHERS:



FOR THE SUPPLY OF TWO DOUBLE ACTING HYDRAULIC CYLINDERS 210mm DIAMETERS, BORE



WITH 110mm DIAMETER PISTON ROD FOR MOVEMENT OF MAIN RAM.



FOR THE SUPPLY OF 3 OFF LINEAR TRANSDUCERS, COMPLETE WITH MOUNTING BRACKETS



AND ACTUATORS INCLUDING CONTROL CARDS FOR INTERFACE WITH THE PLC.



FOR THE SUPPLY OF 4 OFF PRESSURE TRANSDUCERS.



TO SUPPLY ALL CABLES COMPRISING OF A COMBINATION OF MAIN MOTOR AND POWER



CABLES AND MULTI CORE CONTROL CABLES



MAIN RAM RUBBER SEAL 900mm x 950mm x 114mm

PIERCER RAM RUBBER SEAL 360mm x 400mm x 100mm

2 CYLINDER BUSH

CONTAINER CYLINDER ROD DIAMETER 240mm

2 GLAND BUSH

2 PIERCER PISTON ROD



1 HOLLOW STEM

ONE SET OF HYDRAULIC SPARES

ONE SET OF 3 SIZES OF CAP SCREWS

ONE SET OF ELECTRICAL SPARES

ONE SET OF LIMIT SWITCHES

ONE SET OF PARTS TO MODIFY THE PRE-FILL VALVE



APPROXIMATE COST FOR THIS UPGRADE IN 2008: $1 MILLION U.S. DOLLARS



**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**



**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
 
This machine is listed for sale by Machinery International Corp located in North Branford, Connecticut
 
Contact the Seller
 
Machinery International Corp
  20 Commerce Drive
North Branford
CT 06471
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details