buy & sell, new & used
machinery, machine tools
not a member?
Lathes & Turning Centers
OKUMA LS7215 21 X 60 GEARED HEAD ENGINE LATHE - $10,800
Item Number: #
OKUMA LS7215 21 X 60 GEARED HEAD ENGINE LATHE
Country of Origin: Japan
Model: LS 7215
Serial #: 41964
Geared Head Engine Lathe
Inch/ mm Thread
10" Three-Jaw Chuck
Kirkelie 200 Series Tool Holder
Swing Over Bed: 21"
Swing Over Cross Slide: 10.6"
Swing Over Compound Slide: 5.5"
Distance Between Centers: 58"
Thru Hole: 2 1/4"
Number of Speeds: 12
Speed Range: 35 to 1,800 RPM
Cross Slide Travel: 10.6"
Compount Slide Travel: 5.5"
T-Slot Dimnesions: 1-3/16" x 1-55/64" (approx.)
Inch: 4 to 56, Metric: 0.5 to 7mm
Spindle Taper: #4 Morse Taper
Spindle Diameter: 2.56"
Spindle Travel: 6-3/4"
Motor: 10 Horsepower, 220/440 Volt, 1,500 / 1,800 RPM, 50 / 60 Hz
Electrical: 440 Volt, Three Phase
Overall Dimensions: 110" x 48" x 60" tall, Weighs: 7000 Lbs
Comes as shown in pictures. Sold As-is
GUARANTEE: If any machine guaranteed by us does not prove satisfactory mechanically, the Purchaser may return it freight prepaid within 14 days from date of shipment and we will refund the purchase price in full. This does not apply to machine sold “as is” or “subject to inspection”. This guarantee applies only to machines which we own. The machine must be returned in the same condition that it left our warehouse. MachineStation shall not be responsible for any damage done by truckers, riggers, or other parties. Machine damaged in shipping are not covered under the return privilege.
WARRANTY: Seller makes no warranties of any kind whatever, expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement.
MACHINE USE AND SAFETY: Buyer acknowledges that the goods described herein are pre-owned used goods which were neither designed or manufactured by the Seller, nor has the Seller knowledge of, or control over, the prior use or misuse of said goods: nor does the Seller have knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.
BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.
This machine is listed for sale by
located in Chino, California
Find more listings for
Okuma Engine Lathes,
Used Engine Lathes
Engine Lathes in California
Contact the Seller
4590 Eucalyptus Ave
Type the code shown*:
* Mandatory field
Note: For security all enquiries may be monitored
* Report advert as sold or incorrect details
All fields are required
Your Phone Number
Help / FAQ
Terms & Conditions
Copyright © 2009-2014 MachineSales.com. All Rights Reserved.