buy & sell, new & used
machinery, machine tools
not a member?
Used Brandt OPTIMAT KD 78/ 2C Automatic Edge Bander with used Ligmatech ZHR 01/R/045 Return Conveyor - $25,500
Item Number: #
Used Brandt OPTIMAT KD 78/ 2C Automatic Edge Bander with used Ligmatech ZHR 01/R/045 Return Conveyor
Year of Manufacture:
OPTIMAT KD 78/ 2C
Used Brandt OPTIMAT KD 78/ 2C Automatic Edge Bander with used Ligmatech ZHR 01/R/045 Return Conveyor.
Edgebander equipped with a PC-16 Program Control with a 7.4" color LCD screen, 8 MB IDE Flash Disc 100 MHZ 486 DX4 Hard Drive, 8 MB RAM and internal modem for remote diagnostic link; with automatic height adjustment for top pressure beam with all work stations with digital height indicator; signal light at infeed for panel spacing; automatic magazine for strip and coil feeding with a large coil table (800mm diameter) for up to 3mm PVC; Quickmelt granulate glue application system; quick-change glue tank; reversible rotation of glue application roller; infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength; first pressure roller driven and three idle pressure rollers; with a two motor end trimming unit for straight and up to 15 degrees chamfer with pneumatic indexing via program control; top and bottom fine trimming station with digital "Quickset" system with tilt from 0 to 25 degrees with pneumatic indexing via program control; second top and bottom fine trimming station with digital "Quickset" system with tilt from 0 to 25 degrees with indexing via program control; two motor contour trimming station for corner rounding/trimming; sound and safety enclosure with centralized dust extraction outlet; with top and bottom scraping station with pneumatic indexing via program control; with an electronic frequency changer for all trimming motors with electronic brakes; with electrical controls wired for AC 3/60/230 volt operation; having an edgeband thickness capacity of 0.016-1/2"; edge band height capacity of 1/2" to 2-3/8"; minimum panel length of 6-3/8" and a minimum width capacity of 2-3/8"; with panel thickness capacities of 5/16" min. and 2-3/16" max.; with a feed motor delivering a feed rate of 46 F.P.M.
Note: Not available until May 2016, Can be seen in operation.
This machine is listed for sale by
Hermance Machine Company
located in Williamsport, Pennsylvania
Contact the Seller
Hermance Machine Company
178 Campbell Street
Type the code shown*:
* Mandatory field
Note: For security all enquiries may be monitored
* Report advert as sold or incorrect details
All fields are required
Your Phone Number
Help / FAQ
Terms & Conditions
Copyright © 2009-2014 MachineSales.com. All Rights Reserved.