Woodworking Equipment > Sanders > Edge & Stroke Sanders    < Back

9" x 138-3/4" POWERMATIC® OES-9138 Oscillating Edge Sander - $RFQ

Item Number: #00097282
9&quot; x 138-3/4&quot; POWERMATIC&#174; OES-9138 Oscillating Edge Sander
 
 
 


9" x 138-3/4" POWERMATIC® OES-9138 Oscillating Edge Sander
 
Stock Code:  1791282
Price: $RFQ
Subcategory: 

Edge & Stroke Sanders

Manufacturer:  Powermatic
Model:  OES9138
Condition: New
 
CALL FOR AVAILABILITY AND BEST PRICING!

FEATURES:
The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.
3HP motor with 9" x 138-3/4" abrasive belt handles large workpieces
Oscillates 24 cycles per minute for better finish and longer belt life
9-1/2" x 48" platen with graphite pad offers largest work surface in its class
Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
Pedestal control switch for easy access
Large 11-3/4" x 48" front worktable with 8" vertical travel tilts and 45° tilt, includes miter head for angle work
Precision balanced 9" diameter drive drum and 4" diameter rubber coated idler pulley for positive drive and rigid tracking
Large radius end table has 6" vertical travel and 45° tilt for any angle and working height needed
Heavy-duty oscillating gearbox and shaft for long maintenance-free use
Hinged guard opens for infinite length sanding
Dual dust collection ports keep work area clean and extend abrasive belt life

STANDARD EQUIPMENT:
Two 4" dust ports
Tilting main and end tables
Platen with graphite pad

SPECIFICATIONS:
Style (Type): Horizontal/Vertical Oscillating Edge
Sanding Belt Size (L x W) (In.): 9 x 138-3/4
Belt Speed (FPM): 3542
Drum Diameter (In.): 4 Outboard, 9 Drive
Platen Size (In.): 9-1/2 x 48
Oscillations Per Minute: 24
Main Table Size (L x W) (In.): 48 x 11-3/4
Main Table Tilt (Deg.): 5 In, 45 Out
Table Height from Floor (In.): 34-1/2 - 40-3/4
End Table Size (In.): 18
End Table Tilt (Deg.): 40 In, 45 Out
Electrical Controls: Magnetic Starter
Dust Collection Minimum CFM Required (CFM): 1,100
Dust Port Outside Diameter (In.): 4
Motor Power (HP): 3
Motor Phase: 1
Motor Voltage (V.): 230 only
Recommended Circuit Size (Amps.): 30


Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 5 YEAR – Limited
 
This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
 
Contact the Seller
 
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details