Machine Tools > Grinders & Grinding Machines > Cylindrical Universal Grinders    < Back

1980 - TONGIL TGU27 UNIVERSAL CYLINDRICAL GRINDER - 10.6" X 20" - $RFQ

Item Number: #00068070
1980 - TONGIL TGU27 UNIVERSAL CYLINDRICAL GRINDER - 10.6&quot; X 20&quot;
 
 
 


1980 - TONGIL TGU27 UNIVERSAL CYLINDRICAL GRINDER - 10.6" X 20"
 
Stock Code:  JK-12161
Price: $RFQ
Subcategory: 

Cylindrical Universal Grinders

Swing10.6"
Centers20"
Year of Manufacture:  1980
Manufacturer:  Tongil
Model:  TGU27
Condition: Used
 
SPECIFICATIONS
TABLE SIZE 10.6″ X 20″

WORKHEAD
SWIVEL OF WORKHEAD: 360 DEGREES
(120 DEGREES GAUGED)
SWING OVER TABLE: 10.6″
GRINDING LENGTH BETWEEN CENTERS: 20″
DIAMETER GROUND WITH NEW WHEEL (MAX): 6″
WORKPIECE WEIGHT(MAX): 286 LBS
WORKHEAD SPEEDS (6 STEPS): 46, 68, 100, 152, 238, & 360
RPM AT 60 HZ
WORKHEAD CENTER TAPER: M.T. #4
DIAMETER OF SPINDLE HOLE: 0.77″

WORK TABLE
LONGITUDINAL TRAVERSE
MANUAL (MAX): 25″
HYDRAULIC (MAX): 24.4″
HYDRAULIC (MIN): 0.3″
AUTOMATIC LONGITUDINAL TRAVERSE: 2 – 157 IN/MIN
TRAVERSE PER HANDWHEEL REVOLUTION: 0.25″
SWIVEL ANGLE INCLUDED: RIGHT SIDE OF TABLE MOVES
11 DEGREES TOWARD THE
WORKHEAD & 5 DEGREES
AWAY FROM THE WORKHEAD

WHEELHEAD
SWIVEL OF WHEELHEAD: 30 DEGREES EACH DIRECTION
(60 DEGREES TOTAL)
TRAVERSE ON SCREW MAXIMUM: 6.3″
RAPID TRAVERSE (HYDRAULIC MAXIMUM): 1.57″
WORKPIECE RED, PER REV HANDWHEEL: 0.08″
CROSS FEED HANDWHEEL GRADUATIONS: 0.0002″
WORK DIAMETER REDUCTION PER ONE
DEPRESSION OF FINE ADVANCE BUTTON: .0002″
SPINDLE SPEEDS (2): 1660 & 1880 RPM
GRINDING WHEEL (STANDARD SIZE)
DIAMETER X THICKNESS X BORE: 14″ X 1 1/4″ X 6″
GRINDING WHEEL THICKNESS RANGE: 1″ – 2″

TAILSTOCK
TRAVEL OF TAILSTOCK SPINDLE: 1.18″
TAILSTOCK SPINDLE TAPER: M.T. #4

INTERNAL GRINDING SPINDLE
(TWO QUILL OF DIFFERENT SIZES ARE STANDARD)
INTERNAL GRINDING RANGE DIAMETER: 0.59″ – 3.15″
SPINDLE SPEED: 18,000 RPM
MOTOR POWER: 1 HP
SPINDLE TAPER: M.T. #2
QUILL (DIAMETER X LENGTH): 0.47″ X 2″
(TWO PIECES ARE STANDARD): 0.71″ X 3.15″
GRINDING CAPACITY: 0.78″ – 1.96″ X 2.36″
DIAMETER X MAXIMUM DEPTH: 1.38″ – 3.15″ X 3.54″
INTERNAL GRINDING WHEEL: 0.78 ” X 0.78″ X 0.24″
DIAMETER X WIDTH X BORE: 1.34″ X 0.98″ X 0.35″

FLUID CAPACITIES
WHEELHEAD LUBRICATION: 2.8 GALLONS
HYDRAULIC SYSTEM: 14.25 GALLONS
CUTTING FLUID: 21 GALLONS

ELECTRIC MOTOR POWER
WHEELHEAD: 5 HP
WORKHEAD: 0.4 HP
HYDRAULIC PUMP: 1 HP
WHEELHEAD LUBRICATION PUMP: 0.27 HP
CUTTING FLUID PUMP: 0.16 HP

AUTOMATIC INCREMENTAL WHEEL FEED
AUTOMATIC INCREMENTAL INFEED: 0.039 INCH/DIA
INCREMENTAL FEED (OR PART DIAMETER): 0.0001 – 0.002″
AUTOMATIC PLUNGE FEED
(TOTAL): 0.0016 – 0.16 IN/MIN
(FINISHING RANGE): 0.0016 – 0.019 IN/MIN
(ROUGHING RANGE): 0.019 – 0.16 IN/MIN

GENERAL
SPINDLE CENTER HEIGHT FROM FLOOR: 40″
OVERALL HEIGHT: 53.5″
FLOOR SPACE REQUIRED: 130″ X 71″
NET WEIGHT (APPROX): 4,840 LBS
SHIPPING WEIGHT (APPROX): 5,686 LBS

ELECTRICS: 208 VOLTS, 3 PH, 60 CYC

EQUIPPED WITH
INTERNAL GRINDING SPINDLE (NEEDS TO BE REBUILT)
8″ 3-JAW CHUCK FOR WORKHEAD
6″ 3-JAW CHUCK FOR WORKHEAD
OPERATION & PARTS MANUALS
COOLANT
SET OF ID SPINDLE ARBORS (8)
CENTERS
STEADY REST
 
This machine is listed for sale by Action Machinery Co., Inc. located in Bethlehem, Pennsylvania
 
Contact the Seller
 
Action Machinery Co., Inc.
  2320 Highland Ave
Bethlehem
PA 18002
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details