16" x 60" SHARP® Cylindrical Grinders with CNC |
|
Stock Code: |
OD1660S |
Price: | $RFQ |
Subcategory: | Cylindrical Grinders CNC |
Swing: | 16" |
Centers: | 60" |
Manufacturer: |
Sharp |
Model: |
OD1660S |
Condition: | New |
CALL FOR BEST PRICE!
FEATURES:
Various grinding operations can be performed on these models.
Entire table way is hand scraped to retain lubricating oil at all times.
Spindle of wheel head is mounted on 3 matched pairs of preloaded high precision angular contact bearings by FAFNIR to ensure precision grinding.
S model has CNC single axis wheel head infeed system driven by servo motor and precision ball screw using touch screen conversational program.
Worktable is driven by variable speed inverter motor; table feed rate can be adjusted by simply turning a knob.
Work head can swivel 45 degrees each way for taper grinding.
The work head spindle that turns the work piece is equipped with variable speed control for easy setting of the turning speed. It also has high/low gear to ensure enough torque in turning heavy pieces.
Work head is equipped with 5C-lever type collet closure for quick and precise holding of work piece.
Table can swivel for taper grinding.
Spindle of wheel head has variable speed drive.
Wheel head can swivel 15 degree left or right to perform shoulder grinding.
Separate auto lube systems for table ways and wheel head ways.
Change of grinding wheel can be done safely by loosening of set screws instead of using special clamps to loosen the wheel flange nut.
STANDARD EQUIPMENT:
5C Lever Type Collet Closure
Auto Lube System
Coolant System (12 Gal) with splash guard
Grinding Wheel with Flange
Wheel Extractor
Carbide Tip Center (2)
Balancing Arbor with Stand
2 Diamond Dresser (table & tailstock)
Wired 220V (440V Requires Optional Transformer)
Toolbox & Tools
SPECIFICATIONS:
CAPACITY
Swing over Table: 16.5"
Distance Between Center: 60"
Max Grinding Diameter: 16"
Max Load Between Centers: 400 lbs.
WHITE-HEADED RANGE
Infeed range: 10"
Auto Infeed Range (S model only): 0.00001” to 0.04”
Auto infeed rate (S model only) (in/min): 0.04 – 2.0
Rapid forward and retract: 1.6"
Manual Feed, Graduation (dia.): 0.08”
Manual Feed, Revolution (dia.): 0.0002”
Swivel Angle: +/- 15 degrees
GRINDING WHEEL
OD x Width x ID: 16” x 1.5” x 5”
Optional Wheel Width: 2"
Wheel Speed: 1,960 RPM
INTERNAL GRINDING ATTACHMENT (opt.)
Grinding Bore Range: 0.6” to 3.9”
Max. Grinding Length: 3.9"
Spindle Speed (vari-speed, H-L)
20,000 rpm (std.)
16,000 rpm (opt.)
Wheel Motor: 1 HP
WORK HEAD
Spindle Speed (vari-speed)
20-120 rpm (L)
60-360 rpm (H)
Swivel Towards and Away from Operator: 30 degrees and 90 degrees
Taper of Center: MT#5
TABLE
Auto Feed (vari-speed): 2 to 160 IPM
Manual Feed (per revolution): 0.5"
Swivel Towards and Away from Operator: 4 degrees and 9 degrees
TAILSTOCK
Spindle Stroke: 1.25"
Center Taper: MT #4
MOTORS
Wheel Drive: 7.5 HP
Work head Drive: 1 HP
Hydraulic Pump Drive: 2 HP
TANK CAPACITY
Coolant tank (gal.): 20
Hydraulic tank (gal.): 15
GENERAL
Width x Depth: 24' x 6'
Approx. Weight: 12,000 lbs.
OPTIONAL ITEMS:
CALL FOR PRICE:
440V Transformer for OD618
3-Jaw Chuck (6”) with Back Plate
Insider diameter grinding attachments (3) holders, (3) wheels
6” Magnetic Chuck with Back Plate
Spare Wheel Adapter (Flange)
Carbide half center
Auto drive dogs (6)
Double shoe steady rest
Triple shoe steady rest
Angle dresser, table mounted
Radius dresser, table mounted
Micro feed for wheel head (S models only)
Work rest (2)
Balancing Stand
Coolant System with Paper Filters (25 gal)
Coolant System with Paper Filters and Magnetic Separator (25 gal)
Hydraulic tailstock (factory installed)
A swing down Internal Diameter grinding attachment is available for
different sizes of ID grinding.
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida