USED KMT C-350 AV 5” MANUAL COLD SAW, 2 Speed, Manual pull down, Mitering |
|
Stock Code: |
10390 |
Price: | $RFQ |
Subcategory: | Cold & Carbide Saws - Metal |
Blade diameter: | 14" |
Manufacturer: |
Kalamazoo |
Model: |
C350 AV |
Condition: | Used |
USED KMT C-350 AV 14” MANUAL COLD SAW
Cutting Capacity, Round Solid @ 90 deg: 3.5” m.s. / 2.25” s.s.
Cutting Capacity, Round Solid @ 45 deg: 2.75” m.s. / 2” s.s.
Cutting Capacity, Round Solid @ 60 deg: Right only 2” m.s. / 1.25” s.s.
Cutting Capacity, Round Tube @ 90 deg: 5”
Cutting Capacity, Round Tube @ 45 deg: 5” R / 4” L
Cutting Capacity, Round Tube @ 60 deg: Right only 4”
Cutting Capacity, Square Tube @ 90 deg: 4”
Cutting Capacity, Square Tube @ 45 deg: 4”
Cutting Capacity, Square Tube @ 60 deg: Right only 4”
Cutting Capacity, Flat & Profile @ 90 deg: 4” x 7” wide
Cutting Capacity, Flat & Profile @ 45 deg: 4.75” x 3.9”
Cutting Capacity, Flat & Profile @ 60 deg: Right only 3.5” x 3.5”
Mitering (manual / powered): Manual
Saw Blade Dimensions: 12.5” - 14” (315mm/350mm)
Way Type: Vertical column
Cutting Speeds: 18 or 36 RPM
# of Speeds: 2
Saw Blade Feed: Manual
Table Working Height: 35”
Main Saw Motor: 4 H.P.
Voltage: 220 / 440 volt 3 phase
Currently Wired: 440 volt w/ machine mounted transformer
Coolant Pump Motor: 200 watt
Coolant Type: Flood
Coolant Tank Capacity: 5 Gallons
Air Requirements: 90 PSI
Dimensions: 133” x 28” x 78”
Weight: 1,800 LBS
Equipped with:
Heavy duty vertical column design
Pneumatic quick clamp vise
Blade mounting specs: 32mm arbor w/ 2 10mm pins
Mitering to 45 degrees left and 60 degrees right
7.125” max. vise opening
5’ manual conveyor mounted to right and left side of the saw head
440 volt transformer mounted to the saw base
(2) cutting speeds
Powered blade chip brush
This machine is listed for sale by Westbrook Engineering
located in Warren, Michigan