Machine Tools > Lathes & Turning Centers > CNC Flatbed Lathes    < Back

44" x 59" - 236" SHARP® CNC Big Bore Flat Bed Lathe - $RFQ

Item Number: #00086435
44&quot; x 59&quot; - 236&quot; SHARP&#174; CNC Big Bore Flat Bed Lathe

44" x 59" - 236" SHARP® CNC Big Bore Flat Bed Lathe
Stock Code:  STB-44
Price: $RFQ

CNC Flatbed Lathes

Manufacturer:  Sharp
Model:  STB-44
Condition: New

This is a high precision CNC flat bed lathe with FANUC Oi-TD control. The STB series is available with option of 6", 9", 12" or 15" spindle bore, 44.1" swing over bed and 59" to 236" distance between centers. The bed width is 32" and the spindle motor is available up to 60 HP.
The CNC Big Bore Lathes feature a unique design of one piece casting base that allows heavy cutting with high precision. The hardened and ground bedways are made from high quality Meehanite castings with internal ribbings for vibration dampening, heat distortion prevention and long lasting stability. There are 4 levels of geared spindle speeds to deliver full torque under various speeds. Change of each level is commanded by M code, operated hydraulically. Bedways and ballscrews are centrally lubricated with low level alarm. Headstock is equipped with heat exchanger to disperse heat and maintain spindle accuracy. Full length chip conveyor and enclosed splash guard are all standard accessories.

FANUC Oi-TD Controller
Spindle 4-steps speed auto. change
XZ-axes auto. lubrication system
XZ-axes with Turcite-B
XZ-axes C3 ball screw
Rear chain type chip conveyor
Manual tailstock MT#6
Steady rest 16"
Coolant system
Full enclosed splash guard
Heat exchanger
Dead center (2 piece set)
Tools & tool box
Operational manual
Packing pallet
Tailstock interference protection
Electronic hand wheel (MPG, Manual Pulse Generator)
Alarm lamp for working & cutting finish
Work lamp
Level pads
RS-232 interface

Max Swing Over Bed: 44.1" (1120)
Swing Over Cross Slide: 30" (760)
Distance Between Centers:
59" (1500), 78.74" (2000), 118.11" (3000), 157.48" (4000), 196.85" (5000), 236.22" (6000)

Width of Bed: 32" (810)
Length of Bed:
134" (3403), 154" (3911), 193" (4902), 232" (5982), 272" (6908), 311" (7899)
Bed Way: 2 V, 2 Flat Ways

Spindle Bore: 6" (Opt: 9", 12", 15")
Spindle Nose: A2-11 (Opt: A2-15, A2-20)
Range of speeds (5.98" bore): 6-500 rpm (may vary by chuck size or motor HP)
Range of speeds (6"-15" bore): 7-350 rpm (may vary by chuck size or motor HP)
No. of Spindle Speeds: 4 steps/Hydraulic
Spindle Taper: MT 6

X-Axis Travel: Hydraulic Turret: 23.62", H4-600mm
Z-Axis Travel:
59" (1500), 78.74" (2000), 118.11" (3000), 157.48" (4000), 196.85" (5000), 236.22 (6000)
Diameter of X-Axis Ball Screw: 32 mm
Diameter of Z-Axis Ball Screw: 63 mm

X,Z-axis rapid: 196.85"/min (5000 mm/min)
X,Z-axis feed rate: 118.11"/min (3000 mm/min)

Turret Type: 4 tools (H4), 8 tools (V8), 12 tools (V12), VDI (coolant access)
Tool Shank/Numbers: 1.23" x 1.23", Opt: 1.57" x 1.57"
Tool Holder Bore Diameter: 1.97"

Quill Diameter: 7.87" (200)
Quill Travel: 11.8" (300)
Quill Taper: MT6
Body Movement: Attached to saddle (std), or hydraulic (opt)
Body Lock-Type: Manual (OP: Hydraulic Type)
Quill Movement: Manual (std), Motorized (opt)

Spindle Motor: 30HP (std, Fanuc alpha 22), 40 HP (opt), 60 HP (opt)
X-axis Servo Motor: 4 HP (Fanuc AC servo)
Y-axis Servo Motor: 5.5 HP (Fanuc AC servo)
Hydraulic Pump: 2 HP (1.5 kw)
Coolant Pump: 1.7 HP (1.275 kw)

Control: Fanuc Oi-TD

Transformer 55KVA
Transformer 60KVA
3-jaw scroll strong chuck (direct mounted) A2-11-20" (500mm)
3-jaw scroll strong chuck (direct mounted) A2-11/15-25" (630mm)
Hydraulic 3-jaw wedge type through-hole power chuck 18"
Hydraulic 3-jaw wedge non through-hole power chuck 18"
4-jaw independent chuck 32" (810mm, A2-11)
4-jaw independent chuck 40" (1000mm, A2-11)
4-jaw independent chuck 50" (1250mm, A2-11)
Face plate with 4-jaw, A2-11-32"
Face plate with 4-jaw, A2-11-40" (grip range 150-900mm)
Face plate with 4-jaw A2-11-50" (grip range 150-1150mm)
Steady rest 16" (bearing type, grip range 60mm-400mm)
Steady rest 24" (bearing type, grip range 380mm-600mm)
Follow rest (grip range 30-150mm)
Boring attachment for bar diagram 120mm
Spindle oil chiller 12000BTU
Hydraulic turret 4-way turret H4 (Square dia. 250, tool shank 32x32mm)
Hydraulic turret V-8 tools - boring toolholder 50mm-3 pcs, facing toolholder 32x32-1 pcs, 40, 32, 20, 16, 12, 10mm to fit boring toolholder
Hydraulic turret V-12 tools - boring toolholder 50mm-3 pcs, facing toolholder 32x32-1 pcs, 40, 32, 20, 16, 12, 10mm to fit boring toolholder
Tailstock with hydraulic quill
Tailstock base hydraulic with lock bolt
Air conditioner

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details