buy & sell, new & used
machinery, machine tools
not a member?
Grinders & Grinding Machines
12" Dia Cap 20hp HP Supertec STC-2008NC CENTERLESS GRINDER, Mitsubishi PLC menu-driven LCD touch screen cntrl - $RFQ
Item Number: #
12" Dia Cap 20hp HP Supertec STC-2008NC CENTERLESS GRINDER, Mitsubishi PLC menu-driven LCD touch screen cntrl
Maximum workpiece diameter
Maximum workpiece diameter
SUPERTEC STC-2008NC CENTERLESS GRINDER
w/Single Axis Automatic Controlled Regulating Wheel
The CII model utilizes a Mitsubishi PLC menu-driven LCD touch screen
control that is easy operate, along with a servo motor for the regulating
wheel. Simply fill in the blanks to set total grind amount, rough grind
amount, fine grind amount, dwell times, and retracting clearance, then
press cycle start to complete the automatic grinding cycle.
- Both grinding & regulating wheel spindles are made of
NI-CR-MO alloy steel, which is normalized and carbonized
hardened and ground for longer life and better accuracy.
- Hydrostatic Babbitt bearings type spindle with a 3-point
support design, surrounded by a high pressure oil film,
eliminates metal-to-metal contact to provide heavy duty
grinding capability as well as high vibration damping performance.
- A pressure switch interlock prevents spindle start-up
until oil pressure is established.
- This pressure switch interlock also stops the spindle if
oil pressure fails for longer spindle life.
- The regulating wheel travels on double V ways are hand-scraped
and Turcite coated for precise and smooth movement to ensure
high accuracy and longer way life.
- Both grinding & regulating wheels equip with hydraulic dressing
unit. Dressing speed is infinitely variable. Various profile
dressing can be achieved with optional template.
- Hydraulic dressing unit for the regulating wheel can be rapidly
and precisely swiveled up to ±3° for grinding taper in infeed
grinding and for providing better contact between workpiece
and grinding wheel to achieve better surface roughness, roundness,
- All gears in the gearbox are made of Chrome-Molybdenum alloy
steel (SNCM-21), are hardened and precision-ground for smooth
running and low noise.
- The hydraulic system is air cooled to maintain constant oil
temperature and separated from machine to eliminate vibration
and dissipate heat.
- The optional servo driven variable speed regulating wheel
helps to achieve optimal surface speed for a better cutting
capability and a superior surface finish.
- Optional automatic loading & unloading for infeed & thrufeed
can be custom-built to meet your requirements, allowing the machine
to be run unattended, at a high production rate, while maintaining a
Work diameter (with standard workrest): 0.04"~2"
Work diameter (with special workrest): 2"~4"
Wheel size (Diameter x Width x Bore): 20"x 8"x 12"
Spindle speed: 1070 rpm
Dressing increment (per graduation): 0.0005"
Dressing increment (per revolution): 0.0625"
Wheel size (dia x width x bore): 12"x 8"x 5"
Spindle speeds (10 steps): 15~308 rpm
Handwheel per graduation: 0.002"
Handwheel per revolution: 0.2"
Swivelling angle: ±5°
Inclining angle: ±5°
Dressing increment per graduation: 0.0005"
Dressing increment per revolution: 0.0625"
Rapid feeding of saddle handwheel
- per graduation: 0.002"
- per revolution: 0.25"
Micro feeding of saddle handwheel
- per graduation: 0.000050"
- per revolution: 0.00625"
Grinding wheel motor: 20 HP
Hydraulic motor: 2 HP
- Grinding wheel with flange - Coolant system
- Regulating wheel with flange - Diamond tools
- Wheel balancing arbor - Standard thrufeed blade
- Levelling bolts with blocks - Standard thrufeed workrest
- Maintenance tools & tool box - Wheel extractor
- Heat exchanger for hydraulic system
Options & Extras (call for pricing):
OPTIONAL AUTOMATION SYSTEMS:
- Electric eject attachment
- Air eject attachment
- Hydraulic auto infeed attachment
- Std. auto vibration feeder (dia. 400mm)
- Automatic loading & unloading attachment for infeed
- Automatic loading for thrufeed
- Outgoing conveyor & receiver
- Forming attachment
OPTIONAL COOLANT SYSTEMS:
- Coolant system w/mag. sep. & paper filter (20L/min, 80L)
- Coolant system w/mag. sep. & paper filter (60L/min, 140L)
- Coolant system w/magnetic separator (20L/min, 83L)
- Coolant system w/magnetic separator (40L/min, 172L)
- Coolant system w/paper filter (20L/min, 80L)
- Coolant system w/paper filter (60L/min, 140L)
EXTRA WHEELS & FLANGES:
- Grinding wheel (20" x 8" x 12", 38A)
- Grinding wheel flange
- Regulating wheel (20" x 8" x 5", A)
- Regulating wheel flange
WORKREST & BLADE OPTIONS:
- Thrufeed workrest (0.04" - 2")
- Special thrufeed workrest (2" - 4")
- Infeed workrest (0.04" - 2")
- Special infeed workrest ( 2" - 4")
- Thrufeed blade (various sizes)
- Infeed blade (various sizes)
- Balancing stand for STC-20
- Input rail & output rail (L: 8"/ea)
This machine is listed for sale by
Machinery Values Inc.
located in Harrison, New Jersey
Contact the Seller
Machinery Values Inc.
401 Supor Blvd
Type the code shown*:
* Mandatory field
Note: For security all enquiries may be monitored
* Report advert as sold or incorrect details
All fields are required
Your Phone Number
Help / FAQ
Terms & Conditions
Copyright © 2009-2014 MachineSales.com. All Rights Reserved.