Machine Tools > Grinders & Grinding Machines > Centerless Grinders CNC    < Back

Micron, MIC-600III-15D-RDT,24"x12"grind Wheel,30hp,7.9"grind cap.Fanuc 18-T,1999 - $RFQ

Item Number: #00065123
Micron, MIC-600III-15D-RDT,24&#034;x12&#034;grind Wheel,30hp,7.9&#034;grind cap.Fanuc 18-T,1999
 
 
 


Micron, MIC-600III-15D-RDT,24"x12"grind Wheel,30hp,7.9"grind cap.Fanuc 18-T,1999
 
Stock Code:  23290
Price: $RFQ
Subcategory: 

Centerless Grinders CNC

Manufacturer:  Micron
Condition: Used
 
Serial No. 4798 New - 1999

SPECIFICATIONS:
Grinding Capacity.....................................203 mm (7.9")
Grinding Wheel - Diameter (O.D.) - Maximum.............610 mm (24")
- Minimum...........488 mm (19.2")
- Width.................................305 mm (12")
- Hole (I.D.)...........................304.8mm (12")
- Speed.............................27 m/sec (835 RPM)

Regulating Wheel - Diameter (O.D.) - Maximum.........330 mm (12.9")
- Minimum.........264 mm (10.3")
- Width...............................305 mm (12")
- Hole (I.D.)..........................203.2 mm (8")
- Speed................20 - 200 RPM (Variable Speed)

Motors:

Grinding Wheel......................................22 kW 4P (30 HP)
Regulating Wheel........................................2.2 kW (3 HP)
R. Wheel Lower Side...............................0.5 kW (Servomotor)
G. Wheel Rotary Dresser....................................0.75 kW 2P
G. Wheel Dresser Infeed Slide.....................0.2 kW (Servomotor)
G. Wheel Dresser Traverse Slide...................0.5 kW (Servomotor)
R. Wheel Dresser Infeed Slide.....................0.2 kW (Servomotor)
R. Wheel Dresser Traverse Slide...................0.5 kW (Servomotor)

Hydraulic Power Supply...................Variable Discharge Vane Pump
25 liter/min, 1.5 kW 4p

Centralized Lubrication System:

Motor Pump Lube Unit for Slide Ways.........................70 W 2P

Coolant System:

Main Coolant Pump..........................................0.4 kW 2P
Sub Coolant Pump...........................................0.4 kW 2P
Rotary Dresser Coolant Pump................................0.18 kW 2P
Paper Filter.....................................................60 W
Temperature Regulator (OIL MATIC)..........................1.5 kW 2P

Swivel Angle:

Feed Angle - Vertical Swivel..................-1 degree to +5 degrees
Horizontal Swivel Angle...............................+/- 0.5 degrees

Required Utilities:

Compressed Air Supply......................60 PSI (Approx. 120 L/min)
Hydraulic Fluid..............................Approximately 60 Liters
(16 Gallons)
Coolant.....................................Approximately 1070 Liters
(282 Gallons)
Required Power Supply .......................................460/3/60

Approximate Dimensions..............................6900 mm x 4500 mm
Approximate Weight............................................8000 kg


EQUIPPED WITH:

Fanuc 18T CNC Control
Schmitt Industries SBS Grinding Wheel Balancer
Gantry Style Loader/Unloader
Control Gaging In-Process/Post-Process Gage System
Operation Panels
Control Panel (Control Enclosure)
Hydraulic Power Supply
Coolant System

The Machine is provided with five CNC-Servomotor Controlled Slides controlled
by two CNC Head Units:

CNC System's Head #1:
Regulating Wheel Dresser Infeed Slide...........X1-Axis
Regulating Wheel Dresser Traverse Slide ........Z1-Axis
Regulating Wheel Lower Slide....................Y1-Axis

CNC System's Head #2:

Grinding Wheel Dresser Infeed Slide.............X2-Axis
Grinding Wheel Dresser Traverse Slide...........Z2-Axis

In addition, an AC Spindle-Motor controlled by the CNC System is adopted
to drive the Regulating Wheel Spindle.

The Machine offers the Automatic Compensation Functionality to maintain the

part O.D. within the specific tolerance and the Automatic Dressing

Functionality employing the FANUC CNC System, the Post-process and In-process

Gage System, or the Preset Counters. In the continuous automatic operation,

the CNC System will regulate a period of sparkout in the grinding cycle, while

the In-process Gaging System is activated to measure the O.D. of the part to

be ground to control the O.D. dimension. The CNC System will regulate, or

shift, the Regulating Wheel Lower Slide to compensate the grinding wheel's

wear rate according to the output signal of the Post-process Gage System or

the Preset Counter, and the preset data programmed in the CNC System.


*Preliminary Specifications Subject to Verification.
 
This machine is listed for sale by Liberty Machinery Company located in Lincolnshire, Illinois
 
Contact the Seller
 
Liberty Machinery Company
  111 Schelter Road
Lincolnshire
IL 60069
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details