Machine Tools > Brakes & Folding Machines > Box & Pan Brakes (Finger)    < Back

10' x 10 ga BAILEIGH® Hydraulic Box & Pan Brake with NC - $RFQ

Item Number: #00064660
10&#39; x 10 ga BAILEIGH&#174; Hydraulic Box &amp; Pan Brake with NC

10' x 10 ga BAILEIGH® Hydraulic Box & Pan Brake with NC
Stock Code:  BB-12010H-NC
Price: $RFQ

Box & Pan Brakes (Finger)

Manufacturer:  Baileigh
Model:  BB-12010H-NC
Condition: New

The BB-12010H-NC 2 axis NC hydraulic box and pan brake is a powerful machine that can bend up to 10 gauge mild steel and 12 gauge stainless steel. The sheet metal brake machine has a rigid welded steel frame with massive truss rods for additional support to minimize any deformation with bending at full capacity. This box and pan brake has 26-6" fingers assorted in different sizes so the fabricator can adjust them for different box and pan applications.
This NC hydraulic sheet metal brake allows the operator to dial in a programmed bend when the machine is used in the manual or semi-automatic mode. Operation of the machine can be done at the operator console by toggle or by using the foot pedal controls. The base of this model has an extra rigid design to support the weight of heavier materials. The powerful BB-12010H-NC clamps the material at the beam, lifts the leaf to the pre-programmed bend, and finally opens the beam when the bend is complete.
Also included in this version of the BB-12010H-NC is a numerically controlled back gauge that allows the operator to control the distance between bends and allows for more efficiency and less error.
Made in Taiwan

2 Axis NC Back Gauge
Hydraulically Driven Bend Plate
Easy Degree Adjustment Auto-stop
Semi-Automatic bending mode with foot pedal control for increased productivity.
Heavy Duty Construction
Easy Material Thickness Adjustment
Variable Bending Speed
Easy Clamping Pressure Adjustment
Greasable Joints and Filtered Hydraulic System for Longevity.
Top of the line electrical components.

Capacity Length: 120"
Capacity Thickness (SS): 10 ga (12 ga)
Bend Angle: 0 – 135 deg.
Finger Size: 3" / 4" / 5" / 6"
Beam Adjustment: 1"
Min Reverse Bend: .984"
Box Depth: 6"
Motor: 5 hp
Power Requirement: 220V / 3-phase
Shipping Dimensions (L/W/H): 153" / 46" / 71"
Shipping Weight: 7,700 lbs.

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details