Machine Tools > Bending & Forming Machines > Benders - Hand    < Back

2-1/2" BAILEIGH® Manual Tube Bender - $RFQ

Item Number: #00064655
2-1/2&quot; BAILEIGH&#174; Manual Tube Bender

2-1/2" BAILEIGH® Manual Tube Bender
Stock Code:  RDB-050
Price: $RFQ

Benders - Hand

Manufacturer:  Baileigh
Model:  RDB-050
Condition: New

The RDB-050 manual tube bender was designed as an affordable bender that has enough capacity for just about any chassis fabrication shop. The RDB-050 is revolutionary in design, function and capacity. The RDB-050, from Baileigh Industrial, is extremely powerful and can bend up to 2-1/2" OD mild steel with a wall thickness of .120" and 2" OD Chromalloy with a wall thickness of .120".

The most unique feature of the RDB-050 is that it has three selectable bending speeds. The proper speed for each application depends on the material type, OD and wall thickness. Speed one (4 degrees per pull) has the most torque and would be used for bending 2" OD Chromalloy or 2-1/2" OD mild steel. Speed two produces 8 degrees (for intermediate materials), while speed three produces 12 degrees (for lighter gauge materials) with each pull. Also, the RDB-050 can bend in one shot without having to stop and reset the machine

The RDB-050 manual tube bender has no disassembly or assembly needed to produce a bend. Simply walk up to the RDB-050 and put your tubing into the hook arm insert and begin bending. When the bend is complete, return the machine to the home position and pull your bend out, or position it for the next bend. The RDB-050 tube bender can bend up to 200 degrees and an anti spring back mechanism holds each bend in place as the operator ratchets forward.

All pivot points on the RDB-050 utilize aluminum bronze bushings and thrust washers, for long life. The hook arm has quick release inserts to assist when changing over the machine to a different size of tubing. A complete changeover should take no more than one minute.
The RDB-050 comes complete with the stand, bend handle and degree dial. Just add tooling and you are ready to bend tube.
Made in the USA

Minimum OD: 3/4"
Mild Steel Round Tube (Wall): 2-1/2" (.120)
Mild Steel Solid Rod: 1"
Mild Steel Pipe Schedule 40: Call for Details
Mild Steel Round Tube Wall: 2.5" (.120)
Stainless Steel Pipe Schedule 40: Call for Details
Stainless Steel Round Tube Wall: 2" (.120)
Chromolly Round Tube Wall: 2" (.120)
Aluminum Pipe Sch. 40: Call for Details
Aluminum Round Tube Wall: 2.5" (.120)
Maximum Center Line Radius (CLR): 7"
Minimum CLR: 3"
Power Requirements: Manual
Dimensions (approx.): 42" x 22" x 42"
Weight: 290 lbs

B-LUBECP: Biodegradable Bend Lube: 8oz
B-LUBEPT: Biodegradable Bend Lubes: 16 oz
B-LUBEQT: Biodegradable Bend Lubes: 32 oz
ORG-3600: Outside Radius Gauge
IRG-3600: Inside Radius Gauge
AF-360D: 360 Degree Digital Angle Finder
AF-360D-Holder: Clamp and Holder for AF-360D Angle Finder

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details