Lifting Equipment > Banding Machinery > Banding Lines    < Back

SIGNODE, Slit Coil Banding Line (11273) - $RFQ

Item Number: #00024885
SIGNODE, Slit Coil Banding Line (11273)
 
 
 


SIGNODE, Slit Coil Banding Line (11273)
 
Stock Code:  11273
Price: $RFQ
Subcategory: 

Banding Lines

Manufacturer:  Signode
Model:  0
Condition: Used
 
MACHINE # 11273

SPECIFICATIONS:
MANUFACTURER: SIGNODE AUTOMATED SYSTEMS
PURPOSE: TO AUTOMATICALLY BAND SLIT COILS
DOWNENDER: TO REMOVE COIL FROM TURNSTILE OF SLITTING LINE
DRIVEN ROLLER CONVEYOR: TO MOVE COIL INTO BANDING STATION

THE LINE CONSISTS OF TWO LOOPCO COIL UPENDERS TO ACCEPT SLIT COILS FROM

DISCHARGE TURNSTILES FROM UP TO TWO DIFFERENT DIRECTIONS FEEDING INTO A

SIGNODE M-20 BANDING STATION WITH ROTATING/INDEXING TURNTABLE. DISCHARGE

CONVEYOR TO BE SUPPLIED BY PURCHASER OR BY UTILIZING ONE OF THE UPENDERS.

MANUFACTURER:
- UPENDERS: LOOPCO MFG CORP (USA)
- BANDING STATIONS: SIGNODE CORP (USA)

CAPACITY:
COIL I.D.: MIN. 13" (330mm)
MAX. 24" (610mm)
COIL O.D.: MAX. 60" (1524mm)
COIL FACE: MIN. 3" (76mm)
COIL WIDTH: MIN. 3/8" (9.5mm)
MAX. 16" (406mm)
COIL WEIGHT: MAX. 6000 LB. (2722 KG)

SIGNODE BANDING HEAD:
MODEL No.: M20-SV6
SERIAL No.: 26066
TENSION: MIN. 50 LB. (22 KG)
MAX. 1200 LB. (544 KG)
STRAP FEED RATE: 3 FT./SEC. (0.914m/SEC.)
STRAP TENSION RATE: 3 FT./SEC. (0.914m/SEC.)
STRAP THICKNESS: .020" (0.5mm)
.023" (0.584mm)
.031" (0.787mm)
.035" (0.889mm)
STRAP WIDTH: 3/8" (9.5mm)
1/2" (12.7mm)
5/8" (15.87mm)
3/4" (19mm)
SEAL TYPE: 38 MNA, 12 MNA, 58 MNA OR 34 MNK
SEAL CAPACITY: 300, 250, 250, 250
DISPENSER: DF 23
CAPACITY: 100 LB. COIL MILLWOUND, PSM GRADE
DRIVE: 3 HP, 1675 RPM, 220/440 VOLT, 3 PH, 60 HZ

PNEUMATIC (AIR) EQUIPMENT: FILTER, REGULATOR, HAND OPERATED 3-WAY
VALVE TO RAISE AND LOWER INDEXING ROLLS

AIR MOTOR DRIVE ON INDEXING ROLLS: 3/4 HP @ 75 PSI

CONVEYOR SPEED: 0-60 FPM (0-18m/MIN.)
ELECTRIC SERVICE REQUIRED: 220 OR 440 VOLT, 50 OR 60 CYCLE, 3PH
AIR SERVICE REQUIRED: 75 PSI FILTERED AIR

BANDING STATION INDEXING ROLLER TABLE:
FLOOR SPACE: 70" x 94" (1778mm x 2387mm)
ROLL SIZE: 5" DIA. x 18" FACE (127mm DIA. x 457mm FACE)
QUANTITY: 1 SET PER SIDE
No. OF ROLLS: 11 PER SIDE

DOWNLAYER No. 1:
CAPACITY: 6000 LB. (2721 KG)
ROLL SIZE: 3 1/2" DIA. x 60" FACE (89mm DIA. x 1524mm FACE)
TABLE SIZE: 60" x 58" (1524mm x 1473mm)
OVERALL FLOOR SPACE: 64" x 70" (1625mm x 1778mm)
NINETY DEGREE UPENDER
NINETY DEGREE AXIS ROTATION (TO ACCEPT COILS FROM TWO DIRECTIONS INCLUDING

FROM DOWNLAYER No. 2 OR FROM TURNSTILE)

DOWNLAYER No. 2:
CAPACITY: 8000 LB. (3629 KG)
ROLL SIZE: 3 1/2" DIA. x 64" FACE (89mm DIA. x 1625mm FACE)
TABLE SIZE: 64" x 60" (1625mm x 1524mm)
OVERALL FLOOR SPACE: 72" x 84" (1828mm x 2133mm)
NINETY DEGREE UPENDER
NO AXIS ROTATION
ACCEPTS COIL FROM TURNSTILE

MACHINE CAN BE PURCHASED USING ONE DOWNLAYER OR TWO. PURCHASER TO SUPPLY

DISCHARGE CONVEYOR.

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
 
This machine is listed for sale by Machinery International Corp located in North Branford, Connecticut
 
Contact the Seller
 
Machinery International Corp
  20 Commerce Drive
North Branford
CT 06471
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details