Machine Tools > Rolling Mills & Ring Formers > 2Hi / 4Hi Rolling Mills,    < Back

Rolling Mill -Ingot thickness : 225mm -Hot coil thickness : 12-16mm - $RFQ

Item Number: #00088648
Rolling Mill -Ingot thickness : 225mm -Hot coil thickness : 12-16mm
 
   


Rolling Mill -Ingot thickness : 225mm -Hot coil thickness : 12-16mm
 
Stock Code:  12718
Price: $RFQ
Subcategory: 

2Hi / 4Hi Rolling Mills,

Condition: Used
 
MACHINE # 12718

Rolling Mill
-Ingot thickness : 225mm
-Hot coil thickness : 12-16mm in 8 passes for copper and 10 passes for brass

alloys
-Width : 450mm (option : 520mm)
-Productivity : 10 tons per hour

-3.9.2.1 Mill stands equipment. Housing posts machined with separators to

interconnect the drive and operator side wear plates lines bronze screwed at

the inside faces of housing. Keeper plates axially lock the chocks within the

mill housing. Lubrication of the chocks plats manually with grease.
2 hydraulics roll force single acting cylinder: number provided: 2. Located at

the bottom of the mille stand area between roll chocks and housing, and

applying the required rolling force as well as compensation of roll diameter

reduction.

Operating pressure: 500 bar
Total effective roll force: 8000 KN
Piston diameter: 320mm

cylinder stroke : 70mm

-3.9.2.2 2 screws down system. Located at the top of the mill stand area and

use for setting a constant pass line after roll change.
Screw diameter : 200 mm
Vertical Stroke : 40 mm

-3.9.2.3 2 sets rolls with roll chocks and oil film hearing
Roll Diameter: max 602 mm / min 540 mm
Effective barrel length : 520 mm
Overall roll length : 2030 mm
Material : alloyed Forged steel

4 Rolls forged chocks (1set) : mounting bronze bush bearing oil film


-3.9.2.4 Mill stand entry and exit edger

To reduce ingot width a double vertical stand edger is installed on the

horizontal 2 Hi stand. Edger motors and gears boxes are located at mill top on

platform.
Edger rolls diameter : 250 mm fix at spindle bottom
Edger hydraulic rolling Force : 110 KN
Edger installed Power : 4 X 18Kw
Edger gear box ratio : 18/1

-3.9.2.7 Mill stand drives

-Pinion stand gear type unit gear ratio 18,88/1
-Motors 2 X 800Kw
-Drives spindles slipper type
-Spindle supports

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
 
This machine is listed for sale by Machinery International Corp located in North Branford, Connecticut
 
Contact the Seller
 
Machinery International Corp
  20 Commerce Drive
North Branford
CT 06471
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details