- X machine tools (7)
- X Furnaces & Ovens (7)
- X Furnaces - Induction Heating (7)
LEPEL LSP12-75/30 Induction Heater, frequency generator manufactured by LEPEL Inc. as 75 KW – 30 KHZ, Model LSP12-75/30, Serial No. B-56391-11, is currently powering an out of service R&D induction furnace. Located i
TOCCO INDUCTRON II W/MICROPRESSOR CONTROL
ELECTRICS: 460V / 60Hz / 3 PHASE
INPUT: 120 KVA
OUTPUT: 100 Kw
MISSING SOME COMPONENTS INSIDE CABINET
MACHINE # 12717
3.8- Ingot preheating and reheating furnaces
From ingot storage building, each ingot is transferred by the transfer car
back to the gas preheating furnace charging table. A set of 3 ingots are
MACHINE # 12710
The Vertical Ingot Induction Heating
ladle Furnace's capacity:
-Capacity : 10 tons
-Temperature : 1200C
-Heating capacity : 4,5 tons per hour
3.1- Two (2) Verticals Ingots Inductions melt
STAINLESS STEEL VESSEL MOUNTED VERTICALLY ABOVE THE LOAD PLATFORM. INTERIOR OF THE VESSEL HAS AN INDUCTION COIL, 15" DIA CERAMIC SLEEVE AND A 14" DIA GRAPHITE SUSCEPTOR. PARTS TO BE HEATED ARE LOADED AT THE WO
- Chamber width: 12"
- Chamber length: 17"
CHAMBER SIZE: 18" H X 18" W X 18" L
MAXIMUM TEMPURATURE: 1400 DEGREES FARH.
WELDED SHEET METAL WITH STRUCTURAL REINFORCEMENT
HEAVY GAUGE COIL WOUND LOW WAT
- Chamber width: 18"
- Chamber length: 18"