< Back

Machinery International Corp

 
 
Machinery International Corp
 
20 Commerce Drive
North Branford
CT 06471
United States
 
View sellers phone number
View sellers email address
Visit sellers website
 
 

Machinery International Corp Company Overview


Worldwide Suppliers Of High Quality Used Machinery For The Metalworking Industry
Machinery International Corporation is the successor to McMillan Conroy Machinery. Same great people - same great service - but an entirely new company structured to accomodate the changing needs of our customers worldwide.

Machinery International Corp. is one of the world's largest suppliers of used metalworking machinery, specializing in equipment to manufacture ferrous and non-ferrous strip, tube, wire, rod, and bar. Be sure to visit our current inventory for a listing of our available machinery. If you do not see a machine you are looking for, please feel free to give us a call specifying your exact requirements.

Machinery International Corp. maintains its main corporate office in North Branford, Connecticut, U.S.A., approximately ninety minutes from New York City. With a satellite office in Birmingham, England, warehouses in the U.S.A. and England, a network of sales agents around the globe, and machines worldwide, Machinery International Corp. can provide equipment to you no matter where you are in the world. Machinery International's experienced representatives can assist you with the entire process of purchasing used equipment including:

- Identifying the machinery & equipment you need
- Locating the machinery & equipment that's right for you
- Purchasing the machinery & equipment at the right price
- Boxing, containerizing, and shipping the machinery & equipment
- Providing technical assistance for installation and start-up of your machinery

Equipment Listings by Machinery International Corp

Viewing 1 - 20 of 626 listings 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
 Filter: Category: Subcategory:  
  Photo: Machine Detail: Manufacturer: Price:
Condition:
Used (626)

Manufacturer:
Torrington (61)
Fenn (51)
Not-Specified (37)
Waterbury-Farrel (28)
Ruesch (23)
Vaughn (21)
Fastener-Engineers (10)
Not-Specified (9)
Macbee (8)
Schumag (8)
Stanat (8)
Ungerer (8)
Yoder (8)
Bliss (7)
Achenbach (6)
Ajax (6)
George-Mitchell (6)
Stamco (6)
Standard (6)
Bhs-Torin (5)

Location:
CT (626)

Reset
NARROW WIDTH STAINLESS STEEL COIL PROCESSING PLANT (12270) Machinery International
NARROW WIDTH STAINLESS STEEL COIL PROCESSING PLANT (12270) Machinery International
MACHINE # 12270 Narrow Width Stainless Coil Processing Facilities 1. 4 Hi Cold Rolling Mill
Not Specified$RFQ

North Branford, CT
United States
1,000 LBS STEEL HEDDLE, TRAVERSE WINDER 14" TRAVERSE (12220) Machinery International
1,000 LBS STEEL HEDDLE, TRAVERSE WINDER 14" TRAVERSE (12220) Machinery International
table align=center valign=top border=0 cellpadding=7 cellspacing=0>
Not Specified$RFQ

North Branford, CT
United States
9" (228mm) x 24" (610mm) x 24" (610mm), ONE WAY 4-HI ROLLING MILL, 150 HP/4
9" (228mm) x 24" (610mm) x 24" (610mm), ONE WAY 4-HI ROLLING MILL, 150 HP/4
MACHINE# 12176 SPECIFICATIONS: TYPE: ONE-WAY 4-HI ROLLING MILL
Not Specified$RFQ

North Branford, CT
United States
100" (2540mm) x 0.86" (22mm), CUT-TO-LENGTH, 2008-2010, 45 TON COILS, (12160) Ma
100" (2540mm) x 0.86" (22mm), CUT-TO-LENGTH, 2008-2010, 45 TON COILS, (12160) Ma
table align=center valign=top border=0 cellpadding=7 cellspacing=0>
Not Specified$RFQ

North Branford, CT
United States
6000 KW, ABB, 1997,(2) FURNACES, 12 TON CAP., CORELESS INDUCTION (12157) Machinery Interna
6000 KW, ABB, 1997,(2) FURNACES, 12 TON CAP., CORELESS INDUCTION (12157) Machinery Interna
MACHINE# 12157 SPECIFICATIONS: Capable of Melting and Holding in 2 furnaces at the same time (Dual Trak)
Not Specified
IFM-6 TWIN POWER
$RFQ

North Branford, CT
United States
REBAR MANUFACTURING LINE (NEW) [12144] Machinery International
REBAR MANUFACTURING LINE (NEW) [12144] Machinery International
MACHINE# 12144 PURPOSE: A NEW LINE TO COLD ROLL, RIB, STRAIGHTEN & CUT 4-10mm
Not Specified$RFQ

North Branford, CT
United States
B & O, No. 94 DHX, 1997, TUBE SAW W/AUTOFEED (12105)
B & O, No. 94 DHX, 1997, TUBE SAW W/AUTOFEED (12105)
MACHINE 12105 1997 B&O Saws circular pipe cutting, 94 DHX, pedestal, diameter: 0.4 mm, with capacity for cutting various pipes at the same time,
B-O$RFQ

North Branford, CT
United States
4" BRONX, 6CR5 BW, 1972, TUBE/PIPE STRAIGTHENER (12104)
4" BRONX, 6CR5 BW, 1972, TUBE/PIPE STRAIGTHENER (12104)
MACHINE 12104 1972 Bronx England Straightener of tubes, 6CR5 BW, with 6 rollers inclined of hyperbolic section, 2 electric motor of 20 HP, pinch
BRONX$RFQ

North Branford, CT
United States
3-5/8", SLAVA, 1970, 7 ROLL TUBE/PIPE STRAIGHENER 25-92mm DIAMETER (12103)
3-5/8", SLAVA, 1970, 7 ROLL TUBE/PIPE STRAIGHENER 25-92mm DIAMETER (12103)
MACHINE 12103 1969 Slava Straightener of tubes with rollers inclined of hyperbolic, 2 straightening rollers and section 5 reels of back pressure
SLAVA$RFQ

North Branford, CT
United States
2", KEISERLING, 1969,7 ROLL PIPE STAIGHTENER 8-50mm DIAMETER 20 HP (12102)
2", KEISERLING, 1969,7 ROLL PIPE STAIGHTENER 8-50mm DIAMETER 20 HP (12102)
MACHINE 12102 1969 Keiserling Pipe Straightener pipe with roller inclined of hyperbolic, 2 straightening rollers and section 5 reels of back pre
SEISERLING$RFQ

North Branford, CT
United States
SLAVA, 7 ROLL PIPE STRAIGHTENER, 3 HP, 25 M/MIN (12101)
SLAVA, 7 ROLL PIPE STRAIGHTENER, 3 HP, 25 M/MIN (12101)
MACHINE 12101 1970 Slava Pipe straightener roll inclined hyperbolic section, 2 straightening rolls and 5 manual back pressure with manual adjust
SLAVA$RFQ

North Branford, CT
United States
2000 KW, INDUCTOTHERM, 2003, STEEL MELT FURNACE, 500 HZ, (2) 4 TON BOX FURNACES
2000 KW, INDUCTOTHERM, 2003, STEEL MELT FURNACE, 500 HZ, (2) 4 TON BOX FURNACES
MACHINE# 12070 SPECIFICATIONS: Inductotherm Induction Melting Furnace VIP Power Trak Series Year 2003 2000 Kw, 500 Hz (2) 4 Ton D
INDUCTOTHERM$RFQ

North Branford, CT
United States
9" (227mm) x 22" (558mm) x 35" (900mm), 4-HI, 2006, NON-REVERSING COLD ROLL
9" (227mm) x 22" (558mm) x 35" (900mm), 4-HI, 2006, NON-REVERSING COLD ROLL
MACHINE# 12064 9" x 22" x 35" (227mm x 558mm x 900mm) 4-Hi Non-reversing cold rolling mill from aluminum strips production mill New in 2006
Not Specified$RFQ

North Branford, CT
United States
1" - 1/2" (28mm - 12mm), STAINLESS STEEL HEX TUBE MILL, 0.5-4m/MIN. (1.6-13 FPM)
1" - 1/2" (28mm - 12mm), STAINLESS STEEL HEX TUBE MILL, 0.5-4m/MIN. (1.6-13 FPM)
MACHINE# 12061 SPECIFICATIONS: PURPOSE: WELD HEX STAINLESS STEEL TUBE YEAR OF MANUFACTURE: 1998 MAXIMUM TUBE O.D.: 28mm
Not Specified$RFQ

North Branford, CT
United States
DOWNSTREAM HANDLING SYSTEM FOR ALUMINUM EXTRUSION PRESS [12058]
DOWNSTREAM HANDLING SYSTEM FOR ALUMINUM EXTRUSION PRESS [12058]
MACHINE# 12058 SPECIFICATIONS: Downstream handling system for aluminum extrusion press: The below listed equipment has been used for a extrus
Not Specified$RFQ

North Branford, CT
United States
MARSHALL RICHARDS TANDEM WIRE FLATTENING/SHAPING LINE (12047)
MARSHALL RICHARDS TANDEM WIRE FLATTENING/SHAPING LINE (12047)
MACHINE 12047 MARSHALL RICHARDS BARCRO heavy duty wire flattening and shaping line Entry dia.: upto 18.4 mm. dia. Coil weight: 1'800 Kg. max.
MARSHALL-RICHARDS$RFQ

North Branford, CT
United States
60" (1524mm) x .135" (4.75mm), ROWE, STACKER FOR CUT-TO-LENGTH LINE, (12041)
60" (1524mm) x .135" (4.75mm), ROWE, STACKER FOR CUT-TO-LENGTH LINE, (12041)
MACHINE# 12041 SPECIFICATIONS: MATERIAL: HRS, CRS, ALUM. MAX. WIDTH: 60" (1524mm) MIN. SHEET LEN
Not Specified$RFQ

North Branford, CT
United States
3/8", VAUGHN MODEL 1 CONTINUOUS ROLL POINTER (12026)
3/8", VAUGHN MODEL 1 CONTINUOUS ROLL POINTER (12026)
MACHINE #12026 SPECIFICATIONS -MAUFACTURER: VAUGHN -MODEL: NO. 1 -TYPE: CONTINUO
VAUGHN
NO 1
$RFQ

North Branford, CT
United States
10" x 5", REDEX, 5 STND TANDEM, 3 MILLS 2 EDGERS (12008)
10" x 5", REDEX, 5 STND TANDEM, 3 MILLS 2 EDGERS (12008)
MACHINE # 12008 TYPE MILL: WIRE FLATTENING LINE Tandem Rolling Mill Mfg.: REDEX (Fr.) Year Of Mfg.: 2009 (never used)
REDEX
522-150 HC
$RFQ

North Branford, CT
United States
60" (1524mm) x .188" (4.7mm) x 44000#, PRO-ECO, LOOP SLITTING LINE, (11979)
60" (1524mm) x .188" (4.7mm) x 44000#, PRO-ECO, LOOP SLITTING LINE, (11979)
MACHINE# 11979 SPECIFICATIONS: Make: Pro-Eco Type: Loop Slitting Line Coil Width:
Not Specified$RFQ

North Branford, CT
United States
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>