| Photo: |
Machine Detail: |
Manufacturer: |
Price: |
 | DAKE Ratcheting ARBOR PRESSES - made in USA
• Ratchet allows lever to be used in most convenient position.
• Handwheel advances ram to work quickly.
• Counterweight returns lever quickly after | DAKE | $RFQ
Chicago, IL
United States |
 | DAKE ARBOR PRESSES - made in USA
DAKE ARBOR PRESSES - made in USA | DAKE | $RFQ
Chicago, IL
United States |
 | Turn your hydraulic shop press into an iron working machine
Pipe Notcher
Notches pipe with a semi-circular cut to allow one pipe to fit 90° against another for railings. Then just a small amount of weldin | Not Specified | $RFQ
Chicago, IL
United States |
 | Turn your hydraulic press into a Brake Press
Optional Press Brake Tooling as seen in photo is 32 inch long, can bend 3/16 x 32", 1/4 x 24", 3/8 x 6" wide
12 inches long $1295. e | Not Specified | $RFQ
Chicago, IL
United States |
 | Laboratory Compression Heat Press
Laboratory Compression Heat Press
with independently heated electric platens, precise temperature control, rapid advance hydraulics and accurate pres | Not Specified | $RFQ
Chicago, IL
United States |
 | DAKE C-FRAME HYDRAULIC PRESS
Standard Equipment:
• Adjustable Return Stroke
• Remote Pressure Adjustment
• Light Sensitive Thumb Pads
• Run-Jog Selector
• Oversized Heavy dut | DAKE | $RFQ
Chicago, IL
United States |
 | HMI HYDRAULIC SEP C-FRAME PRESS
CAPACITY 35 ton 40 ton 60 ton 80 ton 100 ton 120/150 ton
PRESS PLATEN
L-R, F-B 20" x 10.5" 36" x 14&qu | HMI
35-150Ton | $RFQ
Chicago, IL
United States |
 | H.M.I. PJP C-Frame Hydraulic Press - made in USA
Choose from 42 Ton and 58 Ton sizes
11" stroke
14" throat
18" throat height
38" x 16" press platen
Motor: 10 HP
FEAT | H.M.I.
PJP | $RFQ
Chicago, IL
United States |
 | JET HYDRAULIC SHOP PRESS HP-35A
• Capacity: 35 Tons
• Easy-to-use, hand-operated hydraulic pump
• Pressure gauge for direct pressure readings
• Tables raise and lower easily with | JET
HP-35A | $RFQ
Chicago, IL
United States |
 | JET HYDRAULIC SHOP PRESS HP-15A
• Capacity: 15 Tons
• Easy-to-use, hand-operated hydraulic pump
• Pressure gauge for direct pressure readings
• Tables raise and lower easily with | JET
HP-15A | $RFQ
Chicago, IL
United States |
 | EDWARDS 40 Ton HYDRAULIC PRESS
• Optional Press Brake Tooling is 32 inch long, as seen in photo can bend 3/16 x 32", 1/4 x 24", 3/8 x 6"
• Heavy duty all steel const | EDWARDS
40 Ton | $RFQ
Chicago, IL
United States |
 | HYDRAULIC MOVABLE TABLE PRESS
• Moveable Table allows overhead loading of heavy workpieces.
• Adjustable Workhead Height provides maximum daylight space for oversized work.
• Hea | Not Specified
25-150 Ton | $RFQ
Chicago, IL
United States |
 | DAKE HYDRAULIC DURA-PRESS
• Double acting cylinder design with 5 part oil seals for smooth operation and a tight seal.
• Ram has lifting eyes to move table with chains.
• 2 H | DAKE
DURA-PRESS | $RFQ
Chicago, IL
United States |
 | DAKE 50 Ton HYDRAULIC DURA-PRESS
• Regular Price: Only $6195. Made in USA.
• Motor is 2 hp, 110 volts to plug in anywhere
• Lever control ram advance for easy use.
• Double actin | DAKE
50 Ton | $RFQ
Chicago, IL
United States |
 | DAKE HYDRAULIC DURA-PRESS
• Simple single acting cylinder design with 5 part oil seals for smooth operation and a tight seal.
• Welded heavy steel plate frame for greater rigi | DAKE
DURA-PRESS | $RFQ
Chicago, IL
United States |
 | DAKE H-FRAME HYDRAULIC PRESS
Standard Features:
• Hand Pump or Air or Electric
• Rapid Ram Return
• By-pass Hole
• Adjustable Table with self locking hoist
• Rapid Screw Trav | DAKE
H-Frame | $RFQ
Chicago, IL
United States |
 | BIRMINGHAM Radial Arm Drill Press
TPR-720
TPR-820
TPR-920
TPR-1100
TPR-1230
Column Diameter
8.25"
[210mm]
8.25"
[210mm]
8.25"
[210mm]
10 | BIRMINGHAM
TPR-720,820,920 | $RFQ
Chicago, IL
United States |
 | JET Radial Arm Drill Press
The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothne | JET
J-720R 1100R 12 | $RFQ
Chicago, IL
United States |
 | Rong Fu RF-45 Geared Head Drill-Mill
• Extra heavy duty square column design
• Head tilts 90° left and 45° right
• Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase | Rong Fu
RF-45 | $RFQ
Chicago, IL
United States |
 | Rong Fu RF-40 Geared Head Drill-Mill
• Head tilts 90° left and 45° right and swivels
• Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase
• 5 speed spindle: 60, 130, | Rong Fu
RF-40 | $RFQ
Chicago, IL
United States |
| | | | | | | | | | | |