|
OBERLIN COOLANT FILTER SYSTEM
|
| |
| OBERLIN COOLANT FILTER SYSTEM |
| |
| Stock Code: 09146 |
| |
| Price: $12,500 |
| |
| Subcategory: Miscellaneous Metalworking Machinery |
| |
| Year of Manufacture: 1991 |
| |
| Manufacturer: OBERLIN |
| |
| Model: OPF-7-MD |
| |
| Condition: Used |
| |
OBERLIN COOLANT FILTER SYSTEM
PRICE: Loaded on Truck, Our Warehouse, York, PA .. $12,500.00
Stock # 09146-P
Serial # OPF-7-166 New 4/1991 Model # OPF-7-MD
This filter was taken from a Delphi facility that was shut down in July 2009. The filter was linked to (2) CNC Huffman Grinders. The filter was fully functional at the time of the plant shutdown. It was filtering an oil based coolant.
While the specifications below are thought to be accurate, they are based on general literature information and may not be exactly how this filter unit is configured.
General Specifications:
Filtering Area: 7 Sq. Ft.
(3) Zone Tank
Clean Zone 1 has a 10 HP Pump for Outgoing Coolant
Clean Zone 2 has a 10 HP Pump for Coolant Distribution
Filter Zone 3 has a 10 HP Pump
Control Buttons for Alarm Silence, Alarm Reset, Clean Cycle
Gauges for Air Bag Pressure, Filter Pressure, Dirty Tank Level, Clean Tank Level
Includes:
Monitoring Coolant Temperature System
Supercharge Heat Exchanger
10 HP Compressor
Control Panel with Status Lights
Control On/Off Switch
Temperature Control Monitoring
Paper Roll Media Filter Area (Paper Not Included)
Electrics: 3 Phase, 60 Cycle, 480 Volts
Full Load Amps: 68
How a Pressure Filter Works:
Coolant Filtration System Consists of a:
. Filter Tank with (2) Compartments - Clean and Dirty
. Dirty Side Receives Coolant From Machine and Holds the Coolant Until it is Pumped Thru the Filter
. Clean Side Receives Filtered Coolant and Holds it Until it is Pumped Back to Grinder
. Filter Pump Which Pumps Dirty Coolant to Filter
. Clean Pump(s) Which Return Clean, Chilled Coolant to Machine at Desired Flow Rates and Pressures
. Chiller Which Removes Heat From Coolant
. Optional Ancillary Equipment Like Automatic Coolant Addition, Sumps to Pump Coolant to Dirty Tank From Machine, Tramp Oil Removal Systems
Paper Media System: Cleanable Belt Paperless System:
Filtering Cycle:
The pneumatic airbag holds the filter upper chamber against the lower chamber. Platen seals on the perimeter of the chambers create a liquid tight seal completely around the filter media or cleanable belt.
Solids bearing liquid is pumped under pressure into the upper chamber, forcing the liquid through the filter media or cleanable belt.
The filtered liquid is collected in the lower chamber and drains out.
Drying Cycle:
When the filter pressure reaches 30-40 psi (or higher in some applications), pressurized air or gas is fed into the upper chamber. This forces the liquid through the filtered solids and media or cleanable belt.
After the solids are dried, as indicated by pack pressure and time elapsed, the chamber is lifted.
Discharge Cycle:
The solids are automatically discharged using a disposable media reroller or an endless cleanable belt conveyor. The belt discharges the filtered solids into a hopper.
After discharging, the upper chamber automatically descends and a new filtration cycle starts.
Overall Size: 155" L-R x 128" F-B x 131" H x 15,000 Lbs.
________________________________________
New & Used Machinery . Certified Appraisals . Plant Liquidations
HILDEBRAND MACHINERY CO INC
2023 Black Bridge Road * York, PA * PH. 717-846-2600 * FAX 717-845-949
EMAIL: SALES@HILDEBRANDMACHINERY.COM
WEB: WWW.HILDEBRANDMACHINERY.COM OR WWW.7178462600.COM
All sales subject to our Terms & Conditions page
|
| |
OBERLIN COOLANT FILTER SYSTEM for sale by Hildebrand Machinery Co Inc
Located in York, Pennsylvania
|
|
|
|
|
|
|
| Contact the Seller |
| |
| Hildebrand Machinery Co Inc |
 |
|
2023 Black Bridge Road
York
PA 17402
United States |
|
| |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Report advert as sold or incorrect details |
|
|
|
|
|