|
Italpresse "Formatic/209-P" Press for Veneering Raised Panels
|
| |
| Press with One or Two Membranes to Laminate Veneer or Plastic Foils to 3-D Shaped Panels |
| |
| Stock Code: 091005 |
| |
| Price: $109,860 |
| |
| Subcategory: Vacuum Press, Thermoforming Press |
| |
| Year of Manufacture: 2006 |
| |
| Manufacturer: ITALPRESSE |
| |
| Model: Formatic-209/P |
| |
| Condition: New |
| |
The FORMATIC is perfectly suited for laminating natural wood veneers on raised cabinet and furniture door panels profiled on one face and flat on the opposing face. With the optional double-membrane package the machine can laminate veneer on raised panels for passage doors profiled on both faces. The machine can be supplied with an optional vacuum system to allow high quality 3-D thermoform lamination of PVC films on pre-shaped MDF panels.
The FORMATIC features a 3-D laminating technology that utilizes thermal fluid behind the membrane instead of compressed air. The use of thermal fluid is proven to provide superior heat transfer to the glue line and higher forming pressures when compared to presses utilizing compressed air.
The higher the forming pressure, the more precisely the veneer can be formed to the profile of the panel. This press safely delivers up to 50% more laminating pressure than a press with compressed air behind the membrane. The FORMATIC is equipped with an electronic device to control the forming speed. This feature allows the veneer to soften from the heat and form more slowly resulting in less splitting than with conventional compressed air systems.
With thermal fluid behind the membrane, the transfer of heat is at a constant rate throughout the press cycle. This allows the press to operate at lower temperatures than a compressed air system while delivering the proper quantity of heat to the glue line. Lower laminating temperatures reduce the risk of veneer splitting.
The FORMATIC is not just for laminating veneer. When equipped with the optional vacuum system, it thermoforms PVC films on pre-shaped MDF components with quality second to none. High pressure and low temperature is the reason again. The thermal fluid assures that the glue line reaches the required temperature without overheating the PVC film. The FORMATIC has long been a top choice worldwide for laminating high gloss films when the ultimate in quality is demanded.
Platen dimensions: 2,000 x 900 mm (78.7" x 35.5")
Maximum useful lamination area (approximate): 1,910 x 810 mm (75" x 32")
Loading side: 2,000 mm (78.7")
Total daylight opening of press: 325 mm (12.79")
Number of press cylinders: 3
Diameter of press cylinders: 150 mm (5.9")
Total thrust : 162 metric tons (178 US tons)
Maximum specific pressure: 9 kg/cm2 (128 psi)
Maximum platen temperature: 120° C (248° F)
Electrical boiler power: 27 kw
Hydraulic power unit: 4 kw (5.3 hp)
Voltage: 480 volts, 3 phase, 60 cycle
Standard Features:
Fatigue and distortion resistant weld free steel plate ring frames.
Torsion free mechanical assembly of press structure.
Movement cylinders separate from main press cylinders for high speed opening and closing of the press.
Up-stroke movement of bottom platen containing liquid/membrane package.
Rack and pinion group with torsion rods to assure parallel movement of platen.
Solid steel heating platens drilled for circulation of thermal oil.
Thermal oil boiler heated by electrical resistance elements.
Lower platen covered by natural rubber membrane with synthetic thermal fluid contained between the membrane and heated platen. The quantity of fluid can be varied by the operator according to the volume of panels loaded into the press.
Upper platen is covered with spring tensioned - glue resistant 250-micron mylar film
Electronic adjustment of the pressure build-up speed.
Independent digital control of upper and lower heating platen temperatures
Digital control of the hydraulic pressure.
Digital timer to control "degassing" cycle for veneer lamination.
Digital timer to control automatic press opening upon cycle completion.
Color touch screen interface for digitally setting, monitoring, and controlling cycle time, platen temperatures, and laminating pressure.
Two safety interlocked push-button controls to close the press and initiate the press cycle.
Safety rope with e-stop switch on loading side, metal screens on remaining sides.
UL approved electrical components.
|
| |
Italpresse "Formatic/209-P" Press for Veneering Raised Panels for sale by Italpresse USA, Inc.
Located in Punta Gorda, Florida
|
|
|
|
|
|
|
| Contact the Seller |
| |
| Italpresse USA, Inc. |
 |
|
26520 Mallard Way
Punta Gorda
FL 33950
United States |
|
| |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Report advert as sold or incorrect details |
|
|
|
|
|